manual

Enhancing the Disklavier by Hooking Up Other Devices
English
12
Chapter
111
By connecting monitor speakers, you can listen to the internal XG tone
generator voices or audio from the external audio equipment connected to
the OMNI (SYNC) IN jacks from monitor speakers. Connection methods
vary depending on whether your piano is equipped with the Silent Piano™
function or not.
■ Connecting Optional Monitor Speakers Directly
to the Disklavier Control Unit
If your piano is not equipped with the Silent Piano™ function,
connect monitor speakers following the procedures below.
Connect the INPUT LINE2 jacks on the rear of the monitor
speakers and the OUTPUT jacks on the rear panel of the
Disklavier control unit with the supplied audio cables (pin
plug – phone plug).
Connect the power cables of the monitor speakers to the
AC wall outlet.
Turn on the POWER switches of the monitor speakers.
The monitor speakers are turned on.
Connecting Monitor Speakers
Audio cable
(supplied)
Audio cable
(supplied)
AC wall outlet
Disklavier control unit
POWER
ON
OFF
INPUT
PARALLEL
LINE 1
(--10dB)
LINE 2
(--4dB)
POWER
ON
OFF
INPUT
PARALLEL
LINE 1
(--10dB)
LINE 2
(--4dB)
POWER
ON
OFF
Monitor
speaker (right)
Monitor
speaker (left)
1
2
3