manual

Enhancing the Disklavier by Hooking Up Other Devices
12
Chapter
112
■ In Case that You are Using Monitor Speakers for
Your Piano
Note:
The shape of units or the location of
the AUX IN jacks varies depending
on the piano model.
If your piano is eqipped with the Silent Piano™ function, connect
monitor speakers following the procedures below.
If you have already connected monitor speakers to your piano, connect the
AUX IN jacks of your piano to the OUTPUT jacks of the rear panel of the
Disklavier control unit.
For models equipped with the control box
Connect your piano and the Disklavier control unit using the supplied audio
cable (pin plugs – stereo mini plug).
For models equipped with the amplifier
Connect your piano and the Disklavier control unit using the supplied audio
cables (pin plug – phone plug).
If you cannot find the AUX IN jacks on your piano, connect optional monitor
speakers following the procedures in “Connecting Optional Monitor
Speakers Directly to the Disklavier Control Unit” on previous page.
Disklavier control unit
To AUX IN jack
(stereo mini plug)
Audio cable
(supplied)
Disklavier control unit
To AUX IN jacks
(phone plug)
Audio cables
(supplied)