manual

Enhancing the Disklavier by Hooking Up Other Devices
12
Chapter
118
The Disklavier control unit can transmit the information of piano playing/
ensemble part playback on the Disklavier as the MIDI data to the
connected MIDI device to reproduce the sound with its sound generator,
etc. or to record the MIDI data. The following options should be set up in
advance.
Note:
If you set the connection type setting
to “Add”, the MIDI OUT Port
setting is fixed to “USB.” Note that
you cannot use the MIDI OUT
terminal as MIDI OUT Port.
MIDI OUT Port
Selects the terminal/port used for the data transmission.
MIDI: Select this when the MIDI device is connected to the MIDI OUT
terminal.
USB: Select this when the MIDI device is connected to the USB port.
Note:
If you connected the playback
model and set the connection type
setting to “Replace”, the MIDI OUT
setting is fixed to “ESBL Out.”
MIDI OUT
Selects one of the following parts to be transmitted to the connected MIDI
device.
ESBL Out:Select this when you transmit the ensemble part played back
on the Disklavier.
KBD Out: Select this when you transmit the piano part played on the
Disklavier.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “MIDI” with the cursor buttons ([ ] [ ] [ ] [ ]),
then press [ENTER].
The MIDI setting screen appears.
Setting the Disklavier Control Unit for MIDI Data Transmission
[SETUP] “MIDI”
1
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)

2
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)
