manual

121
English
13
Chapter
Other Settings
The internal XG tone generator has already been tuned to match the
acoustic piano (A3=440 Hz). However, you can re-tune the internal XG
tone generator in accordance with the pitch of the acoustic piano by
following the procedure below.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “M-Tune” with the cursor buttons ([ ] [ ] [ ]
[ ]), then press [ENTER].
The TG Master Tune setting screen appears.
If you connected the playback model, the piano tone will sound
automatically on the XG tone generator. You can change the key of
this tone. Select “Note” with the cursor buttons ([ ] [ ]), then
press [+/YES] and [–/NO] to change the key.
The following key settings are available: A-1, A0, A1, A2, A3, A4,
A5, A6.
Tuning the Tone Generator (TG Master Tune)
[SETUP] “M–Tune”
1
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)

2
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)
