manual

Other Settings
13
Chapter
130
Press [+/YES] and [–/NO] to select the language.
Press [ENTER].
“OK?” flashes in the first line of the screen.
Press [+/YES] to set the language, and return to the
system menu screen.
Press [SYSTEM] to exit from the system menu.
Important:
If you reset your Disklavier control
unit, depends upon the option what
you select, you may lose all
parameters or all data in the internal
memory, or both of these. For
normal use, you do not have to reset.
Necessarily case you have to reset
your Disklavier control unit,
Yamaha strongly recommends that
you backup your songs in the
internal memory. However, you
cannot backup your various
parameter settings.
If you want to return your Disklavier control unit to its initial factory, follow
the procedure below.
Press [SETUP] on the remote control.
The setup menu screen appears.

To make a backup copy of the songs
which are in the internal memory,
see Chapter 11 “Media Management
– Making Backups of Songs” on
page 107.
Select “Reset” with the cursor buttons ([ ] [ ] [ ]
[ ]), then press [ENTER].
The reset screen appears.
3
4
5
6
Resetting the Disklavier Control Unit
[SETUP] “Reset”
1
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)

2
*Passcode *Reset
=SETUP MENU=
(3/3)

>Reset=Parameter
=Reset=
-+ENT