manual

Getting Started
2
Chapter
14
■ Using the Remote Control
To use the remote control, point it at the remote control sensor on the front
panel.
Make sure that the AC adaptor is plugged into the AC wall
outlet.
When you connected the Disklavier control unit to your piano with
the MIDI cables, first turn on the power of your piano.
Press [ON/OFF] on the front panel.

See Chapter 2 “Getting Started –
Turning Off the Disklavier Control
Unit (Standby Mode)” on page 19.
While the control unit is in the standby mode, you can also turn on
the Disklavier control unit by pressing [ON/STANDBY] on the
remote control.
The following message appears on the display, and [ON/OFF] on
the front panel lights green.
After several seconds, the loading screen will appear, and last
selected song will be loaded.
Your Disklavier control unit is now ready for use.
Approx. 5 m
30°
30°
30°30°
30°30°
30°
30°
Turning On the Disklavier Control Unit
1
2
PLEASE WAIT