manual

Getting Started
English
2
Chapter
19
Note:
Press [ON/STANDBY] on the
remote control to turn the Disklavier
control unit back on.
Press [ON/STANDBY] on the remote control.
The ending screen appears, and [ON/OFF] on the front panel lights
red.
When you connected the Disklavier control unit to your piano with
the MIDI cables, turn off your piano.
Note:
Be sure to wait 5 seconds before
turning the Disklavier control unit
back on.
Press [ON/OFF] on the front panel.
The ending screen appears, and [ON/OFF] on the front panel turns
off.
When you connected the Disklavier control unit to your piano with
the MIDI cables, turn off your piano.
Note:
If the external medium contains a
number of albums or songs, it may
take some time for the Disklavier
control unit to recognize them.
Compact Disc
The Disklavier control unit can play songs on commercial audio CDs and
data CDs (such as PianoSoft·PlusAudio).
• The audio CDs should be formatted in CD-DA.
Note:
Do not insert or remove the USB
media while reading or writing data.
Make sure that reading or writing
has finished before doing so.
• The data CDs should be formatted in ISO 9660 Level 1.
USB Flash Memory
You can use commercially available USB flash memories to store song
data. The USB flash memory should be formatted in FAT16 or FAT32 file
system.
USB Hard Disk
You can use commercially available USB hard disk drives to store song
data or make a backup of song data. The USB hard disk drive should be
formatted in FAT32 file system.
Floppy Disk (Optional)
With the optional USB floppy disk drive, you can use 3.5” 2DD or 2HD floppy
disks to store song data. The floppy disk should be formatted in MS-DOS.
Turning Off the Disklavier Control Unit (Standby Mode)
See you again
Shutting Down the Disklavier Control Unit
See you again
Compatible Media Format for the Removable Media