Operation Manual

Updating the Disklavier

English 3

Following the instructions on the screen, select the option

with the cursor buttons ([ ] [ ] [ ] [ ]), then press

[ENTER].

The download process of the update program starts.

After the download process is completed, shut down the

Disklavier by pressing [ON/OFF] on the control unit.

The update program is now downloaded and ready to be installed.

Update the firmware following the procedures in “Updating the

Disklavier” on page 4.

■ Downloading the Update Program Using a PC and

USB Flash Memory

Note:

The USB flash memory that you use

must have a MINIMUM of 20.0 MB

of space to copy the update program.

Prepare the personal computer and USB flash memory.

Download the update program from Yamaha website.

Note:

Copy the update program to the root

directory of the USB flash memory.

Copy the update program you have downloaded to the

USB flash memory.

If you have an earlier version of the

update program on the USB flash

memory you will be using for this

update, make sure to delete it before

updating your Disklavier. Having

more than one update program on the

USB flash memory may cause your

Disklavier to malfunction.

------------------------

*Update Fir

=Update= 

*Cancel



Continued on next page