Specifications

Getting Started
English
2
Chapter
15
After you have connected the Disklavier control unit to your piano, you
must set the type of your piano.
Press [SYSTEM] on the remote control.
The system menu screen appears.
Select “PianoType” with the cursor buttons ([ ] [ ] [ ]
[ ]), then press [ENTER].
The piano type setup screen appears.
Press [+/YES] and [–/NO] to change the connection type
setting.
Note:
If you select “Replace” and this unit
detects your piano as the playback
model, “[PB]” appears on the right
of the screen.
The following connection type settings are available:
Setting the Type of Your Piano
[SYSTEM] “PianoType”
1
2
3
Setting Description
Replace Select this when you replaced the existing unit with
the Disklavier control unit (see page 8).
Add Select this when you connected the Disklavier
control unit to your piano with the MIDI cables (see
page 10).