Specifications

Internet Direct Connection (IDC)
English
5
Chapter
41
)
To use the Internet connection,
inquire of your Internet service
provider.
You can change various settings related to the Internet connection. In most
cases, you do not have to change the default factory settings.
Note:
For information about DNS server
address, IP address, subnet mask
and gateway server address, inquire
of your internet service provider.
Information:
You can confirm the information of network settings.
Use DHCP:
Select the method to determine several addresses. If your router
has DHCP server function, we recommend that you to select
“DHCP” or “DHCP+DNS.”
DNS1/DNS2:
Enter the address of the primary and secondary DNS server. These
settings must be made when Use DHCP is set to “DHCP+DNS” or
“MANUAL.”
IPAddr./SubMask/Gateway:
Enter the address of the control unit, subnet mask and gateway
server. These settings must be made when Use DHCP is set to
“MANUAL.”
Proxy/Proxy Port:
Enter the name and the port number for the proxy server. These
settings are necessary only when a proxy server is located in your
local network.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “Network” with the cursor buttons ([ ] [ ] [ ]
[ ]), then press [ENTER].
The network setting screen appears.
Setting the Disklavier Control Unit for the Internet Connection
[SETUP] “Network”
1
*TimerPlay
*MIDI
*AudioI/O
*M-tune
=SETUP MENU=
(1/2)
]
2