User Guide

ManualsBrandsYamaha ManualsOtherDM1000V2

Using DM1000 Editor

Windows

Getting Started

WindowsKeyboard Shortcuts

Index

DM1000 Editor—Owner’s Manual

Special Notices

•The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this man-

ual in whole or in part by any means is expressly for-

bidden without the written consent of the

manufacturer.

•Copying of the commercially available music

sequence data and/or digital audio ﬁles is strictly pro-

hibited except for your personal use.

•Yamaha makes no representations or warranties with

regard to the use of the software and documentation

and cannot be held responsible for the results of the

use of this manual and the software.

•This disc is a CD-ROM. Do not attempt to play the

disc on an audio CD player. Doing so may result in

irreparable damage to your audio CD player.

•The screen displays as illustrated in this owner’s man-

ual are for instructional purposes, and may appear

somewhat different from the screens which appear on

your computer.

•Future upgrades of application and system software

and any changes in speciﬁcations and functions will

be announced separately.

•The company names and product names in this

Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2

Overview of DM1000 Editor ................................ 2

Configuring DM1000 Editor ................................ 2

Synchronizing DM1000 Editor ............................ 4

Offline Edit Function ............................................ 4

Working with Sessions ......................................... 4

Undo/Redo Function ........................................... 5

Other Functions .................................................... 6

Using DM1000 Editor Windows ............... 7

Master Window .................................................... 7

Layer Windows ..................................................... 8

Selected Channel Window ................................. 12

Library Window .................................................. 17

Patch Editor Window ......................................... 19

Surround Editor Window .................................. 24

Timecode Counter Window .............................. 25

Effect Editor Window ......................................... 25

Meter Window .................................................... 27

Keyboard Shortcuts ................................ 28

Index ....................................................... 29

*Speciﬁcations and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp.

reserves the right to change or modify products or

speciﬁcations at any time without prior notice. Since

speciﬁcations, equipment or options may not be the

same in every locale, please check with your Yamaha

dealer.

Owner’s Manual

DM1000 Editor

Owner’s Manual

Description of menus and buttons

In the event that menu and button names on a Windows system are different from those on a Macintosh, this manual

uses the Windows menu and button names followed by the Macintosh menu and button names in parentheses.

Summary of content (15 pages)

PAGE 1
• • • • • • • • The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation. Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.
PAGE 2
1 DM1000 Editor enables you to remotely control the Yamaha DM1000 mixing console and to save the parameter settings on your computer. To use DM1000 Editor, you must first perform the following operations: Start and configure Studio Manager. 2 Start and configure DM1000 Editor. 3 Synchronize DM1000 Editor with your DM1000 console (see page 4). For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.
PAGE 3
Getting Started Keyboard Shortcuts ❏ Console Setup Using Windows DM1000 Editor Windows Channel Select: These options determine whether or not channel selection is linked. When the PC->Console option is on, selecting a channel in DM1000 Editor selects the same channel on the console. When the Console->PC option is on, selecting a channel on the console selects the same channel in DM1000 Editor.
PAGE 4
2 Select whether you want to transfer your settings to DM1000 Editor, or vice versa. At this time, the All Libs option determines whether or not Scene and Library data is synchronized. PC -> Console: Transfers the current parameter settings in DM1000 Editor to your console. Console -> PC: Transfers the current parameter settings of your console to the DM1000 Editor. 3 Click [OK]. Do not operate the console while synchronization is in progress.
PAGE 5
Undo Choose [Undo] from the [Edit] menu. Redo Choose [Redo] from the [Edit] menu. Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo any previous operation: • Operations on the console • Closing Studio Manager • Changing Surround mode (Stereo/3-1/5.1/6.
PAGE 6
You can copy and paste the channel parameters. In the Console Setup window (page 3), you can also specify the parameters to be copied. The following table describes how to use the Copy & Paste function. Copying a channel Right-click (+click) a copy source channel, then choose [Copy]. Pasting a channel Right-click (+click) the copy destination channel, then choose [Paste].
PAGE 7
Getting Started Using DM1000 Editor Windows Master Window 1 The Master window enables you to switch between layers and control Stereo Out signals. To open this window, choose [Master] from the [Windows] menu. A [ONLINE]/[OFFLINE] button Note: If DM1000 Editor is not connected or is not communicating with the DM1000, clicking this button will not switch the unit from offline to online. This indicator is displayed when DM1000 Editor is connected to the DM1000 correctly.
PAGE 8
❏ Input Channels A Selecting the 1-16, 17-32, or 33-48 button in the Master window displays the corresponding Input Channel strips. B A SOURCE parameter L M N O This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. B Routing buttons These buttons are used to route the Input Channel to the Bus Outs. C [STEREO] button This button is used to route the Input Channel’s signal to the Stereo Out.
PAGE 9
This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging. Q Channel number This is the channel number. Double-click the channel number to open the Selected Channel window.
PAGE 10
When you select the Master LAYER button in the Master window, the Bus Out and Aux Send channels are displayed. The Aux Send channel appears the same as the Bus Out channels except that the Bus Out channels feature a [STEREO] button. A A [STEREO] button (Bus Out only) This button is used to route the Bus Out to the Stereo Out. Getting Started ❏ Output Channels B [INSERT] button B This button is used to turn on and off the Bus Out’s Insert.
PAGE 11
When you select the REMOTE 1 or REMOTE 2 LAYER button in the Master window, Remote Channels are displayed. A Channel number This is the channel number. Double-click the channel number to open the Selected Channel window. Getting Started ❏ Remote Channels B [SELECT] button This button is used to select the Remote Channel. This button turns the Remote Channel on and off. It appears orange while the channel is on.
PAGE 12
Note: You can open multiple Selected Channel windows by choosing [Windows] menu -> [Selected Channel] -> [Additional View]. The titles of these windows will indicate [Locked]. You cannot open Library windows from windows that are indicated as [Locked].
PAGE 13
E ROUTING, PAN & level section This section contains the routing, pan, and level controls and the [AUTO], [SOLO], and [ON] buttons for the currently selected Input Channel. ROUTING buttons 1–8 are used to route the channel to the Bus Outs. The [STEREO] button routes the channel to the Stereo Out. The [DIRECT] button routes the channel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination. The [F.PAN] button turns on and off the Bus Out Follow Pan function.
PAGE 14
B C D E F G A CHANNEL SELECT section Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by clicking the left and right Channel Select buttons. The long channel name is displayed below the Channel ID. The [LIBRARY] button opens the Channel Library window. Keyboard Shortcuts Using Windows DM1000 Editor Windows A Getting Started ❏ Bus Outs This section contains the EQ controls and display graph for the currently selected Bus Out.
PAGE 15
B C D E F G A CHANNEL SELECT section Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by clicking the left and right Channel Select buttons. The long channel name is displayed below the Channel ID. The [LIBRARY] button opens the Channel Library window. Keyboard Shortcuts Using Windows DM1000 Editor Windows A Getting Started ❏ Aux Sends This section contains the EQ controls and display graph for the currently selected Aux Send.