Owner's Manual

Using Inserts 111

DM2000—Owner’s Manual

Using Inserts

Input Channels, Bus Outs, Aux Sends, Matrix Sends, and the Stereo Out all feature assign-

able Inserts.

Using the SELECTED CHANNEL PHASE/INSERT [INSERT ON] Button

1 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select

channels.

2 Use the [INSERT ON] button to turn the currently selected channel’s

Insert on or off.

Insert Pages

Inserts can be conﬁgured on the Insert page. If the Auto PHASE/INSERT Display preference

is on, this page appears automatically when the SELECTED CHANNEL PHASE/INSERT

[INSERT ON] button is operated. See “Auto PHASE/INSERT Display” on page 234.

1 Use the SELECTED CHANNEL PHASE/INSERT [DISPLAY] button to select the

Insert page.

The Insert page for the Input Channels is shown on the left; the Insert page for the Bus Outs,

Aux Sends, and the Stereo out, on the right.

The Insert page for the Matrix Sends is shown below.

INSERT ON