Owner's Manual

116 Chapter 12—Common Channel Functions
DM2000—Owner’s Manual
Grouping Output Channel Compressors
The Bus Out, Aux Send, Matrix Send, and Stereo Out Compressors can be grouped, allow-
ing you to control the compression of several Output Channels simultaneously. There are
four Output Channel Compressor groups: m, n, o, and p.
1 Use the DISPLAY ACCESS [GROUP] button to locate the Output Comp Link
page.
2 Press the LAYER [MASTER] button.
3 Use the Up/Down cursor buttons to select Comp groups m–p.
The selected group is highlighted by a flashing cursor box.
4 Use the [SEL] buttons to add and remove Output Channels to and from the
selected group.
The Compressor settings of the first Output Channel added to the group are applied to all
subsequently added Output Channels.
When an Output Channel is added to a group, its [SEL] button indicator lights up.