Owner's Manual

174 Chapter 17—Automix
DM2000—Owner’s Manual
Parameter Recording
The following table summarizes parameter recording operation for each parameter. Param-
eter adjustments made on the respective display pages are also recorded.
Parameter Channel
OVER
WRITE
Operation Pair/Group
Channel Levels
(faders)
Input
FADER
Set Layer to input, Fader mode to
Fader, use faders
Faders of paired channels and
grouped faders are recorded
together
Bus Out, Aux Send,
Matrix Send
Set Layer to Master, Fader mode to
Fader, use faders
Stereo Out Use Stereo Out fader
Channel Mutes
(ON/OFF)
Input
ON
Set Layer to input, use [ON] buttons
[ON] buttons of paired chan-
nels and grouped mutes are
recorded together
Bus Out, Aux Send,
Matrix Send
Set Layer to Master, use [ON] buttons
Stereo Out Use Stereo Out [ON] button
Pan
Input PAN
Set Layer to input, Encoder mode to
Pan, use Encoders (Also use SELECTED
CHANNEL section PAN control, or
Joystick if [LINK] is on)
If Pan mode is Gang or
Inverse-Gang, paired channels
are recorded together.
Surround Pan
Input SURR
Use Joystick (If [LINK] is on, also use
SELECTED CHANNEL section PAN
control) (If a surround parameter is
assigned to the Encoders, also use
Encoders)
If ST LINK button on Surround
Edit page is on, adjacent chan-
nels are recorded together.
EQ (F, Q, G, On/Off)
Input, Bus Out, Aux
Send, Matrix Send,
Stereo Out
EQ
Use SELECTED CHANNEL EQUALIZER
section (If EQ parameter assigned to
an Encoder, also use Encoders)
EQ of paired channels, and
grouped EQs recorded
together
Aux send 1–12 levels
Input AUX
Use SELECTED CHANNEL
AUX/MATRIX SEND LEVEL controls (If
Layer is input and Fader mode is
Aux/Mtrx, use faders. If Layer is input
and Encoder mode is Aux/Mtrx, use
Encoders)
Aux send levels of paired chan-
nels recorded together. (If the
selected Aux Send is paired,
the send level to both Aux
Sends is recorded.)
Aux send 1–12 mutes
Input
AUX
ON
Use SELECTED CHANNEL
AUX/MATRIX SEND [ON] buttons
Aux send mutes of paired
channels recorded together (If
the selected Aux Send is
paired, mutes for both Aux
Sends recorded.)
Matrix send 1–4
levels
Bus Out, Aux Send
AUX
If Layer is Master and Fader mode is
Aux/Mtrx, use faders (If Layer is Mas-
ter and Encoder mode is Aux /Mtrx,
use Encoders)
Matrix send levels of paired
Bus Outs or Aux Sends
recorded together
Bus Out, Aux Send,
Stereo Out
Use SELECTED CHANNEL
AUX/MATRIX SEND controls
Matrix send 1–4
mutes
Bus Out, Aux Send,
Stereo Out
AUX
ON
Use SELECTED CHANNEL
AUX/MATRIX SEND [ON] buttons
Matrix send mutes of paired
Bus Outs or Aux Sends
recorded together
Scene recalls
——
Use SCENE MEMORY section or Scene
Memory page
—
Library recalls
EQ, Gate, Comp,
Effects, Channel
— Use corresponding library page —
Effect parameters
(certain parameters)
Effects processors
1–8
—
Use Parameter controls 1–4 (push to
punch in/out)
—
User Defined Plug-Ins
(parameters 1–4)
Plug-Ins 1–8 —
Use Parameter controls 1–4 (push to
punch in/out)
—
User Defined Remote
Layers
Faders FADER
Select User Defined Remote Layer, use
faders
—
[ON] buttons ON
Select User Defined Remote Layer, use
[ON] buttons
—
Encoders PAN
Select User Defined Remote Layer, use
Encoder
—