Owner's Manual

Control Surface Operation with the Pro Tools Remote Layer 191
DM2000—Owner’s Manual
INSERT ASSIGN/EDIT
ASSIGN: This indicator works in unison with the EFFECTS/PLUG-INS [5] (ASSIGN)
button indicator. See Assigning Inserts/Plug-inson page 209 for more information.
COMPARE: This indicator works in unison with the EFFECTS/PLUG-INS [6] (COM-
PARE) button indicator. See “Editing Plug-ins” on page 210 for more information.
BYPASS: This indicator works in unison with the EFFECTS/PLUG-INS [7] (BYPASS)
button indicator. See “Editing Plug-ins on page 210 and “Bypassing Individual Plug-ins”
on page 211 for more information.
INSERT: This indicator works in unison with the EFFECTS/PLUG-INS [8]
(INSERT/PARAM) button indicator. See “Editing Plug-ins” on page 210 for more informa-
tion.
INSERT/PARAM Display
This section displays mainly insert and plug-in-related information, although other mes-
sages are also displayed here.
Encoder Display
This section displays information about the Parameter controls 1–4. The SEL indicators
show the on/off status of the Parameter control push-switches. The rotary control indica-
tors show the positions of the Parameter controls. The “O symbol below each Parameter
control shows the automation status for each Parameter control.
Channel Strips
DM2000 channel strips correspond to Pro Tools channels from left to right, with
the leftmost Pro Tools channel being handled by DM2000 channel strip #1. You
can change the order of channel strips by dragging the channel select buttons in
Pro Tools, in which case the DM2000 automatically reorders its channel strips.
By using certain USER DEFINED KEYS, Pro Tools channels can be scrolled
individually (see page 198), or in banks of 24 (see page 198).
ON
SOLO
SEL
AUTO