Owner's Manual

Remote Control 217
DM2000—Owner’s Manual
20 Remote Control
About Remote Layers
The DM2000’s four Remote Layers allow you to control external MIDI equipment directly
from the DM2000. The type of device to be controlled (i.e., the target) can be specified for
each Remote Layer. There are three types of target: User Defined, Nuendo, and Pro Tools.
User Defined targets allow you to specify the MIDI data that will be transmitted when the
24 channel strip faders, Encoders, and [ON] buttons are operated. These settings are stored
in Scenes, for snapshot-style automation. The Nuendo and Pro Tools targets have been
especially designed for controlling Nuendo and Pro Tools.
Assigning Targets to Remote Layers
Targets are assigned to Remote Layers as follows.
1 Use the DISPLAY ACCESS [REMOTE] button to locate the Remote 1–4 pages.
2 Use the cursor buttons to select the TARGET parameter, use the Parameter
wheel or INC/DEC buttons to select a target, and then press [ENTER].
TARGET: This can be set to NO ASSIGN, USER DEFINED, Nuendo, or Pro Tools. Only
one Remote Layer can be set to Nuendo or Pro Tools. See page 218 for more information
on the User Defined target. See page 188 for more information on the Pro Tools target.