Owner's Manual

Configuring the REMOTE Port 221

DM2000—Owner’s Manual

Conﬁguring the REMOTE Port

If you are using the P2 protocol to control a machine, the REMOTE port

must be conﬁgured as follows.

1 Use the DISPLAY ACCESS [SETUP] button to select the Remote

Port Setup page.

2 Use the cursor buttons to select the REMOTE FUNCTION P2 button, and then

press [ENTER].

Transport Buttons

The DM2000’s transport can be used to control external machines. Transport control can

be enabled and disabled for individual machines on the Machine Conﬁguration page (see

page 220).

[REW] button

This button starts rewind on the external machines.

[FF] button

This button starts fast forward on the external machines.

[STOP] button

This button stops the external machines.

[PLAY] button

This button starts playback on the external machines. It’s also used to punch out of record-

ing.

[REC] button

This button is used in conjunction with the [PLAY] button to start recording on the external

machines. Pressing the [REC] button on its own has no effect.

REC

REW

FF STOP PLAY