Owner's Manual

286 Appendix A: Parameter Lists
DM2000—Owner’s Manual
REVERB 5.1
One input, six output reverb for 5.1 surround, with surround panning.
OCTA REVERB
Eight input, eight output reverb.
Parameter Range Description
REV TIME
0.3–99.0 s Reverb time
REV TYPE
Hall, Room, Stage, Plate Reverb type
HI. RATIO
0.1–1.0 High-frequency reverb time ratio
DIFF.
0–10 Reverb diffusion (left–right reverb spread)
DENSITY
0–100% Reverb density
HPF
THRU,
21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
DIV.
0–100%
Divergence determines how the front center signal is fed to
the Left, Right, and Center channels. When set to 0%, it’s
fed only to the Left and Right channels (i.e., Phantom Cen-
ter). When set to 50%, it’s fed equally to the Left, Right, and
Center channels. When set to 100%, it’s fed to only the
Center channel (i.e., Real Center).
ROOMSIZE
0.1–20.0 Size of simulated room’s reverb
POS L/R
L63–R63 Left/right listening position
POS F/R
F63–R63 Front/rear listening position
POS CTRL
OFF, NOR, INV
1
1. When set to NOR, the position can be set by using the Joystick so long as the SELECTED CHANNEL
PAN/SURROUND [EFFECT] button’s indicator is on. When set to INV, the Joystick will work inverse-
ly. When set to OFF, Joystick control is off.
ER L/R
L63–R63 Left/right early reflections position
ER F/R
F63–R63 Front/rear early reflections position
ER LVL
0–100% Early reflections level
ER CTRL
OFF, NOR, INV
1
REV L/R
L63–R63 Left/right reverb position
REV F/R
F63–R63 Front/rear reverb position
REV LVL
0–100% Reverb level
REV CTRL
OFF, NOR, INV
1
Parameter Range Description
REV TIME
0.3–99.0 s Reverb time
REV TYPE
Hall, Room, Stage, Plate Reverb type
INI. DLY
0.0–100.0 ms Initial delay before reverb begins
HI. RATIO
0.1–1.0 High-frequency reverb time ratio
LO. RATIO
0.1–2.4 Low-frequency reverb time ratio
DIFF.
0–10 Reverb diffusion (left–right reverb spread)
DENSITY
0–100% Reverb density
HPF
THRU,
21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
E/R BAL.
0–100%
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)