Owner's Manual

44 Chapter 3—Operating Basics
DM2000—Owner’s Manual
Auto Channel Select & Touch Sense Select
While the Auto Channel Select preference is on (see page 235), channels can be selected by
moving the corresponding fader or Encoder, or by turning on the corresponding [AUTO],
[SOLO], or [ON] button.
While the Touch Sense Select preference is on (see page 237), channels can be selected sim-
ply by touching the fader knobs.
Selecting Fader Modes
The exact function of each fader depends on the selected Layer and Fader mode.
1 Select a Layer, as explained on page 42.
2 Use the FADER MODE buttons to select a Fader mode.
[FADER]: Channel faders control Input Channel levels or Output Chan-
nel master levels, depending on the selected Layer.
[AUX/MTRX]: Channel faders control Aux or Matrix Send levels,
depending on the selected Layer.
The indicator of the currently selected FADER MODE button lights up.
The following table shows the channel fader functions for each Layer and Fader mode.
Layer
Fader
Mode
Fader
1–8 9–16 17–20 21–24
1-24
Fader
CH 1–24: level
Aux/Mtrx
CH 1–24: Aux Send level
25–48
Fader
CH 25–48: level
Aux/Mtrx
CH 25–48: Aux Send level
49–72
Fader
CH 49–72: level
Aux/Mtrx
CH 49–72: Aux Send level
73–96
Fader
CH 73–96 level
Aux/Mtrx
CH 73–96: Aux Send level
Master
Fader
Bus Out 1–8:
master level
Aux Send 1–12: master level
Matrix
Send 1–4:
master
level
Aux/Mtrx
Bus Out 1–8:
Matrix Send level
Aux Send 1–12: Matrix Send level
No opera-
tion: Fad-
ers fixed
at –∞
Remote
1–4
Fader
Operation depends on the selected target. See “About Remote Layers” on
page 217 for more information.
Aux/Mtrx
AUX / MTRXFADER
FADER MODE