DJ Equipment User Manual
Table Of Contents
- Información importante
- Advertencias
- Precauciones
- Notas sobre el funcionamiento
- Precauciones de manejo de SmartMedia
- Interferencia
- DM2000 Exclusión de ciertas responsabilidades
- Marcas comerciales
- Copyright
- Página web de Yamaha
- Contenido del paquete
- Accesorios opcionales
- Acerca de este Manual de Instrucciones
- Convenciones utilizadas en este manual
- Instalar el DM2000
- Contenido
- 1 Bienvenido
- 2 Superficie de control y panel posterior
- 3 Principios básicos de funcionamiento
- Conectar el cable de alimentación
- Activar y desactivar el DM2000
- Acerca de la pantalla
- Seleccionar páginas
- Display History
- Controles de página
- Ventanas de parámetro
- Mensajes de confirmación
- Ventana Title Edit
- Utilizar un teclado
- Pantallas Channel Strip
- Seleccionar capas
- Seleccionar canales
- Seleccionar modos Fader
- Seleccionar modos Encoder
- Asignar parámetros a los botones Assign de ENCODER MODE
- 4 E/S analógica y sección de entrada de AD
- 5 E/S digital y cascada
- 6 Aplicar patches de entrada y salida
- 7 Canales de entrada
- Asignar canales de entrada
- Medir canales de entrada
- Invertir la fase de señal
- Canales de entrada de compuerta
- Atenuar los canales de entrada
- Ecualizar canales de entrada
- Agrupar ecualizadores de canales de entrada
- Inserts de canal de entrada
- Comprimir canales de entrada
- Agrupar compresores de canal de entrada
- Retardar canales de entrada
- Enmudecer canales de entrada (ON/OFF)
- Agrupar Mutes de canales de entrada (ON/OFF)
- Ajustar los niveles de canales de entrada
- Agrupar deslizadores de canal de entrada
- Direccionar canales de entrada
- Panoramizar canales de entrada
- Utilizar Surround Pan
- Enviar canales de entrada a envíos Aux
- Individualizar canales de entrada
- Salidas Direct
- Emparejar canales de entrada
- Utilizar la decodificación MS
- Ver los ajustes del canal de entrada
- Copiar los ajustes del canal de entrada
- Asignar un nombre a los canales de entrada
- 8 Stereo Out
- Conectores Stereo Out
- Asignar Stereo Out a las salidas
- Direccionar canales de entrada a Stereo Out
- Enviar salidas Bus a Stereo Out
- Medir Stereo Out
- Monitorizar Stereo Out
- Atenuar Stereo Out
- Ecualizar Stereo Out
- Agrupar ecualizadores maestros
- Inserts de Stereo Out
- Comprimir Stereo Out
- Agrupar compresores maestros
- Enmudecer Stereo Out (ON/OFF)
- Agrupar Mutes maestros (ON/OFF)
- Ajustar el nivel de Stereo Out
- Agrupar los deslizadores maestros
- Enviar Stereo Out a Matrix Sends
- Equilibrar Stereo Out
- Retardar Stereo Out
- Insertar GEQs
- Ver los ajustes de Stereo Out
- Copiar los ajustes de Stereo Out
- Asignar un nombre a Stereo Out
- 9 Salidas Bus
- Asignar patches de salidas Bus a salidas
- Direccionar canales de entrada a salidas Bus
- Medir salidas Bus
- Monitorizar salidas Bus
- Atenuar salidas Bus
- Ecualizar salidas Bus
- Agrupar ecualizadores maestros
- Inserts de salidas Bus
- Comprimir salidas Bus
- Agrupar compresores maestros
- Enmudecer salidas Bus (ON/OFF)
- Agrupar Mutes maestros (ON/OFF)
- Ajustar niveles de salida Bus
- Agrupar deslizadores maestros
- Enviar salidas Bus a envíos Matrix
- Retardar salidas Bus
- Introducir GEQs
- Individualizar salidas Bus
- Emparejar salidas Bus
- Enviar salidas Bus a Stereo Out
- Ver los ajustes de Bus Out
- Copiar los ajustes de Bus Out
- Nombrar salidas Bus
- 10 Envíos Aux
- Asignar Aux Send Masters a salidas
- Ajustar el modo Aux Send
- Envíos Aux predeslizador o postdeslizador
- Ajustar los niveles de Aux Send
- Enmudecer Aux Sends (ON/OFF)
- Páginas Aux Send
- Ver los ajustes de Aux Send
- Panoramizar envíos Aux
- Medir los Aux Send Masters
- Monitorizar los Aux Send Masters
- Atenuar los Aux Send Masters
- Ecualizar los Aux Send Masters
- Agrupar ecualizadores maestros
- Inserts de Aux Send Master
- Comprimir los Aux Send Masters
- Agrupar compresores maestros
- Enmudecer Aux Send Masters (ON/OFF)
- Agrupar Mutes maestros (ON/OFF)
- Ajustar los niveles de Aux Send Master
- Agrupar deslizadores maestros
- Enviar envíos Aux a envíos Matrix
- Retardar los Aux Send Masters
- Introducir GEQs
- Individualizar los envíos Aux
- Emparejar los Aux Send
- Ver los ajustes de Aux Send Master
- Copiar los ajustes de Aux Send Master
- Dar nombre a los Aux Send Masters
- 11 Envíos Matrix
- Aplicar patches de Matrix Send Masters a salidas
- Envíos Matrix como predeslizador o postdeslizador
- Ajustar los niveles de Matrix Send
- Enmudecer los envíos Matrix (ON/OFF)
- Páginas Matrix Send
- Panoramizar los envíos Matrix
- Ver los ajustes de Matrix Send
- Medir los Matrix Send Masters
- Monitorizar los Matrix Send Masters
- Atenuar los Matrix Send Masters
- Ecualizar los Matrix Send Masters
- Agrupar ecualizadores maestros
- Inserts de Matrix Send Master
- Comprimir los Matrix Send Masters
- Agrupar compresores maestros
- Enmudecer Matrix Send Masters (ON/OFF)
- Agrupar Mutes maestros (ON/OFF)
- Ajustar los niveles de Matrix Send Master
- Agrupar deslizadores maestros
- Balancear los Matrix Send Masters
- Retardar los Matrix Send Masters
- Individualizar Matrix Sends
- Introducir GEQs
- Ver los ajustes de Matrix Send Master
- Copiar los ajustes de Matrix Send Master
- Asignar un nombre a los Matrix Send Masters
- 12 Funciones habituales del canal
- Medición
- Atenuar señales
- Utilizar el ecualizador
- Agrupar ecualizadores de canales de salida
- Utilizar Inserts
- Comprimir canales
- Agrupar compresores de canales de salida
- Retardar señales de canal
- Individualizar canales
- Emparejar canales
- Agrupar deslizadores de canales de salida
- Agrupar Mutes de canales de salida (ON/OFF)
- Visualizar ajustes de parámetros de canal
- Visualizar ajustes de deslizadores de canal
- Copiar los ajustes del canal
- Dar nombres a los canales
- 13 Monitorización y réplica
- 14 Bibliotecas
- 15 Efectos internos, PlugIns y GEQs
- 16 Memorias de escena
- 17 Automix
- Acerca de Automix
- ¿Qué se graba en un Automix?
- Página Main de Automix
- Sección AUTOMIX
- Botones [AUTO] de banda de canal
- Página Memory de Automix
- Páginas Fader Edit
- Seleccionar la fuente de código de tiempo y el intervalo de marco
- Crear un mapa de tipos de compás
- Grabar un Automix
- Regrabar eventos
- Grabar parámetros
- Realizar pinchado de entrada y salida de parámetros individuales
- Reproducir un Automix
- Editar eventos off-line
- 18 MIDI
- 19 Capa remota Pro Tools
- Configurar ordenadores con Windows
- Configurar ordenadores Macintosh
- Configurar el DM2000
- Configurar Pro Tools
- Funcionamiento del control de superficie con la capa remota Pro Tools
- Desplazamiento de ventanas
- Seleccionar canales
- Asignar entradas a canales
- Asignar salidas a canales
- Ajustar los niveles de canal
- Enmudecer canales
- Panoramizar canales
- Individualizar canales
- Asignar destinos Send
- Configurar envíos como Pre o Post
- Ajustar los niveles de Send
- Enmudecer envíos
- Panoramizar envíos
- Modo Flip
- Asignar Inserts/Plugins
- Editar PlugIns
- Desviar Plugins individuales
- Desviar todos los Plugins
- Reajustar deslizadores, envíos, Panpots y Plugins
- Navegar por la ventana Edit
- Ampliar la visualización
- Realizar ajustes finos a la región seleccionada
- Scrub & Shuttle
- Automatización
- 20 Control remoto
- Acerca de las capas remotas
- Asignar destinos a las capas remotas
- Configurar las capas remotas definidas por el usuario
- Utilizar las capas remotas definidas por el usuario
- Acerca del control de equipos (MMC & P2)
- Configurar equipos
- Configurar el puerto REMOTE
- Botones Transport
- Utilizar Shuttle & Scrub
- Utilizar el localizador
- Ajustar las memorias Locate, Preroll, Postroll & Rollback
- Estructurar pistas de equipo
- Configurar MTR Track Arming
- Configurar Master Track Arming
- Configurar grupos de estructura de pista
- GPI (Interface de finalidad general)
- Controlar los convertidores AD824 A/D
- 21 Otras funciones
- Apéndice A: Listas de parámetros
- Asignaciones iniciales de USER DEFINED KEYS
- Parámetros del patch de entrada
- Ajustes del patch de entrada inicial
- Parámetros del patch de salida
- Nombres de canal de salida inicial
- Parámetros de efectos
- Parámetros EQ predefinidos
- Parámetros Gate predefinidos (fs = 44.1kHz)
- Parámetros Compressor predefinidos (fs = 44.1kHz)
- Apéndice B: Especificaciones
- Especificaciones generales
- Controles
- Indicadores
- Bibliotecas
- Especificación de entrada analógica
- Especificaciones de salida analógica
- Especificaciones de entrada digital
- Especificaciones de salida digital
- Especificaciones de ranura E/S
- Especificaciones de control E/S
- Asignaciones de las patillas del conector
- Dimensiones
- Apéndice C: MIDI
- Apéndice D: Opciones
- Índice
- DM2000 Diagrama en bloques
- DM2000 Diagrama de livel
- MIDI Implementation Chart
Format Details 327
DM2000—Manual de Instrucciones
If [TABLE] is selected
If [NRPN] is selected
*1) There is no particular need to add the 2nd, 3rd, and 4th status
for transmission. However if these are present during recep-
tion, they should be received.
*2) Does not need to be transmitted if the parameter data fits
within 7 bits.
4. PROGRAM CHANGE (Cn)
Reception
This message is received if [Program Change RX] is ON and [Rx CH]
matches. However if [OMNI] is ON, this is received regardless of the chan-
nel.
A scene memory will be recalled according to the settings of the [Program
Change Table].
This message will be echoed if [Program Change ECHO] is ON.
Transmission
If [Program Change TX] is ON, this message is transmitted according to
the settings of the [Program Change Table] on the [Tx CH] channel when
a scene memory is recalled.
If the recalled scene has been assigned to more than one program number,
the lowest-numbered program number will be transmitted. Transmission
to Studio Manager using Program Change messages will not be performed
since there is no guarantee that the contents of the tables will match. (Pa-
rameter Changes will always be used.)
5. SONG POSITION POINTER (F2)
Reception
If this is received when the automix TIME REFERENCE setting is MIDI
CLOCK, the automix will move to the song position that was received.
6. TIMING CLOCK (F8)
Reception
If the automix TIME REFERENCE setting is MIDI CLOCK, this message
is used to synchronize automix. It is also used to control effects. This mes-
sage is transmitted 24 times per quarter note.
7. START (FA)
Reception
This message is received if the automix TIME REFERENCE setting is MIDI
CLOCK, and will start the automix. In actuality, automix will start when
the next TIMING CLOCK is received after receiving the START message.
8. CONTINUE (FB)
Reception
This message is received if the automix TIME REFERENCE setting is MIDI
CLOCK, and will cause automix to start from the current song position. In
actuality, automix will start when the next TIMING CLOCK is received af-
ter receiving the CONTINUE message.
9. STOP (FC)
Reception
This message is received if the automix TIME REFERENCE setting is MIDI
CLOCK, and will cause automix to stop.
10. ACTIVE SENSING (FE)
Reception
Once this message has been received, the failure to receive any message for
an interval of 400 ms or longer will cause MIDI transmission to be initial-
ized, such as by clearing the Running Status.
11. SYSTEM RESET (FF)
Reception
When this message is received, MIDI communications will be cleared, e.g.,
by clearing the Running Status.
12. SYSTEM EXCLUSIVE MESSAGE (F0)
12.1 MIDI MACHINE CONTROL (MMC)
These messages are transmitted when the Machine Control section of the
DM2000 is operated. For details, refer to the MMC specification.
12.2 BULK DUMP
This message sends or receives the contents of various memories stored
within the DM2000.
The basic format is as follows.
For DUMP DATA
For DUMP REQUEST
A unique header (Model ID) is used to determine whether the device is a
DM2000.
CHECK SUM is obtained by adding the bytes that follow BYTE COUNT
(LOW) and end before CHECK SUM, taking the binary compliment of
this sum, and then setting bit 7 to 0.
Reception
This message is received if [Bulk RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS.
When a bulk dump is received, it is immediately written into the specified
memory.
When a bulk dump request is received, a bulk dump is immediately trans-
mitted.
Transmission
This message is transmitted on the [Tx CH] by key operations in the [MI-
DI]-[BULK DUMP] screen.
A bulk dump is transmitted on the [Rx CH] in response to a bulk dump
STATUS 1011nnnn Bn
Control change
DATA 0ccccccc cc
Control number (0-95, 102-119)
0vvvvvvv vv
Control value (0-127)
STATUS 1011nnnn Bn
Control change
DATA 01100010 62
NRPN LSB
0vvvvvvv vv
LSB of parameter number
STATUS 1011nnnn Bn
Control change *1
DATA 01100011 63
NRPN MSB
0vvvvvvv vv
MSB of parameter number
STATUS 1011nnnn Bn
Control change *1
DATA 00100110 26
LSB of data entry
0vvvvvvv vv
LSB of parameter data
STATUS 1011nnnn Bn
Control change *1, *2
DATA 00000110 06
MSB of data entry *2
0vvvvvvv vv
MSB of parameter data *2
STATUS 1100nnnn Cn
Program change
DATA 0nnnnnnn nn
Program number (0-127)
STATUS 11110010 F2
Song position pointer
DATA 0vvvvvvv vv
Song position LSB
0vvvvvvv vv
Song position MSB
STATUS 11111000 F8
Timing clock
STATUS 11111010 FA
Start
STATUS 11111011 FB
Continue
STATUS 11111100 FC
Stop
STATUS 11111101 FE
Active sensing
STATUS 11111111 FF
System reset
F0 43 0n 7E cc cc <Model ID> tt mm mm [Data ...]
cs F7
F0 43 2n 7E <Model ID> tt mm mm F7
n
Device Number
cc cc
DATA COUNT (the number of bytes that follow this, ending
before the checksum)
<Model ID>
Model ID (for the DM2000, this is 4C 4D 20 20 38 43 31
32)
tt
DATA TYPE
mm mm
DATA NUMBER
cs
CHECK SUM
CHECK SUM = (-sum)&0x7F