Owner`s manual

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 DM2000 Editor—Owner’s Manual

Using SM Windows

E INSERT section

This section contains the Insert parameters for the Stereo Out. The [ON] button turns the Insert on

and off. The OUT and IN parameters are used to specify the insert out destination and insert in source

respectively. The POSITION parameter is used to specify the position of the Insert in the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Stereo Out.

Its layout is identical to the COMPRESSOR section for Input Channels except there is no [LINK] but-

ton. See “COMPRESSOR section” on page 15 for more information.

G FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP

buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute

groups.

Remote Channels

If the remote target is set to User Assignable Layer, the assigned channels are displayed. For more infor-

mation, refer to “Input Channels” on page 10 and “Output Channels” on page 12. If the Group Master

Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel faders are displayed.