User Guide
Table Of Contents
- Important Information
- Contents
- 1 Welcome
- 2 Control Surface & Rear Panel
- 3 Operating Basics
- Connecting the Power Cord
- Turning On & Off the DM2000
- About the Display
- Selecting Display Pages
- Display History
- Display Page Controls
- Parameter Windows
- Confirmation Messages
- Title Edit Window
- Using a Keyboard
- Channel Strip Displays
- Selecting Layers
- Selecting Channels
- Selecting Fader Modes
- Selecting Encoder Modes
- Assigning Parameters to the ENCODER MODE Assign Buttons
- 4 Analog I/O & the AD Input Section
- 5 Digital I/O & Cascading
- 6 Input & Output Patching
- 7 Input Channels
- Patching Input Channels
- Metering Input Channels
- Reversing the Signal Phase
- Gating Input Channels
- Attenuating Input Channels
- EQ’ing Input Channels
- Grouping Input Channel EQs
- Input Channel Inserts
- Compressing Input Channels
- Grouping Input Channel Compressors
- Delaying Input Channels
- Muting Input Channels (ON/OFF)
- Grouping Input Channel Mutes (ON/OFF)
- Input Channel Mute Master
- Setting Input Channel Levels
- Grouping Input Channel Faders
- Group Master for Input Channel Faders
- Routing Input Channels
- Panning Input Channels
- Using Surround Pan
- Assigning Surround Channels to Buses
- Sending Input Channels to Aux Sends
- Soloing Input Channels
- Direct Outs
- Pairing Input Channels
- Viewing Input Channel Settings
- Copying Input Channel Settings
- Naming Input Channels
- Using the MS Stereo Microphone
- 8 Stereo Out
- Stereo Out Connectors
- Patching the Stereo Out to Outputs
- Routing Input Channels to the Stereo Out
- Sending Bus Outs to the Stereo Out
- Metering the Stereo Out
- Monitoring the Stereo Out
- Attenuating the Stereo Out
- EQ’ing the Stereo Out
- Grouping Master EQs
- Stereo Out Inserts
- Compressing the Stereo Out
- Grouping Master Compressors
- Muting the Stereo Out (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting the Stereo Out Level
- Grouping Master Faders
- Sending the Stereo Out to the Matrix Sends
- Balancing the Stereo Out
- Delaying the Stereo Out
- Inserting GEQs
- Viewing Stereo Out Settings
- Copying Stereo Out Settings
- Naming the Stereo Out
- 9 Bus Outs
- Patching Bus Outs to Outputs
- Routing Input Channels to Bus Outs
- Metering Bus Outs
- Monitoring Bus Outs
- Attenuating Bus Outs
- EQ’ing Bus Outs
- Grouping Master EQs
- Bus Out Inserts
- Compressing Bus Outs
- Grouping Master Compressors
- Muting Bus Outs (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Bus Out Levels
- Grouping Master Faders
- Sending Bus Outs to Matrix Sends
- Delaying Bus Outs
- Inserting GEQs
- Soloing Bus Outs
- Pairing Bus Outs
- Sending Bus Outs to the Stereo Out
- Viewing Bus Out Settings
- Copying Bus Out Settings
- Naming Bus Outs
- 10 Aux Sends
- Patching Aux Send Masters to Outputs
- Setting the Aux Send Mode
- PreFader or PostFader Aux Sends
- Setting Aux Send Levels
- Muting Aux Sends (ON/OFF)
- Aux Send Pages
- Viewing Aux Send Settings
- Panning Aux Sends
- Excluding Certain Channels from Aux Sends (Mix Minus)
- Copying Channel Fader Positions to Aux Sends
- Metering Aux Send Masters
- Monitoring Aux Send Masters
- Attenuating Aux Send Masters
- EQ’ing Aux Send Masters
- Grouping Master EQs
- Aux Send Master Inserts
- Compressing Aux Send Masters
- Grouping Master Compressors
- Muting Aux Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Settings Aux Send Master Levels
- Grouping Master Faders
- Sending Aux Sends to Matrix Sends
- Delaying Aux Send Masters
- Inserting GEQs
- Soloing Aux Sends
- Pairing Aux Sends
- Viewing Aux Send Master Settings
- Copying Aux Send Master Settings
- Naming Aux Send Masters
- 11 Matrix Sends
- Patching Matrix Send Masters to Outputs
- PreFader or PostFader Matrix Sends
- Setting Matrix Send Levels
- Muting Matrix Sends (ON/OFF)
- Matrix Send Pages
- Panning Matrix Sends
- Viewing Matrix Send Settings
- Metering Matrix Send Masters
- Monitoring Matrix Send Masters
- Attenuating Matrix Send Masters
- EQ’ing Matrix Send Masters
- Grouping Master EQs
- Matrix Send Master Inserts
- Compressing Matrix Send Masters
- Grouping Master Compressors
- Muting Matrix Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Matrix Send Master Levels
- Grouping Master Faders
- Balancing Matrix Send Masters
- Delaying Matrix Send Masters
- Soloing Matrix Sends
- Inserting GEQs
- Viewing Matrix Send Master Settings
- Copying Matrix Send Master Settings
- Naming Matrix Send Masters
- 12 Common Channel Functions
- Metering
- Attenuating Signals
- Using EQ
- Grouping Output Channel EQs
- Using Inserts
- Compressing Channels
- Grouping Output Channel Compressors
- Delaying Channel Signals
- Soloing Channels
- Pairing Channels
- Grouping Output Channel Faders
- Group Master for the Output Channel Faders
- Grouping Output Channel Mutes (ON/OFF)
- Output Channel Mute Master
- Viewing Channel Parameter Settings
- Viewing Channel Fader Settings
- Copying Channel Settings
- Naming Channels
- 13 Monitoring & Talkback
- 14 Libraries
- 15 Internal Effects, PlugIns & GEQs
- 16 Scene Memories
- 17 Automix
- About Automix
- What’s Recorded in an Automix?
- Automix Main Page
- AUTOMIX Section
- Channel Strip [AUTO] Buttons
- Automix Memory Page
- Fader Edit Pages
- Selecting the Timecode Source & Frame Rate
- Creating a Time Signature Map
- Recording an Automix
- Inserting Mix Parameters into Automix
- Rerecording Events
- Parameter Recording
- Punching In & Out Individual Parameters
- Playing Back an Automix
- Editing Events Offline
- 18 MIDI
- 19 Pro Tools Remote Layer
- Configuring Windows Computers
- Configuring Macintosh Computers (MacOS 8.6 to 9.2.2)
- Configuring Macintosh Computer (MacOS X)
- Configuring the DM2000
- Configuring Pro Tools
- Control Surface Operation with the Pro Tools Remote Layer
- Scrolling Windows
- Selecting Channels
- Assigning Inputs to Channels
- Assigning Outputs to Channels
- Setting Channel Levels
- Muting Channels
- Panning Channels
- Soloing Channels
- Assigning Send Destinations
- Configuring Sends as Pre or Post
- Setting Send Levels
- Muting Sends
- Panning Sends
- Flip Mode
- Assigning Inserts/Plugins
- Editing Plugins
- Bypassing Individual Plugins
- Bypassing all Plugins
- Resetting Faders, Sends, Panpots & Plugins
- Navigating the Edit Window
- Zooming
- Making Fine Adjustments to the Selected Region
- Scrub & Shuttle
- Automation
- Panner
- 20 Remote Control
- 21 Other Functions
- Appendix A: Parameter Lists
- USER DEFINED KEYS
- USER DEFINED KEYS Initial Assignments
- Input Patch Parameters
- Initial Input Patch Settings
- Output Patch Parameters
- Initial Output Patch Settings
- Initial Input Channel Names
- Initial Output Channel Names
- Initial Input Port Names
- Initial Output Port Names
- GPI Trigger Source & Target List
- User Defined Remote Layer Initial Bank Settings
- Effects Parameters
- Effects and tempo synchronization
- Preset EQ Parameters
- Preset Gate Parameters (fs = 44.1kHz)
- Preset Compressor Parameters (fs = 44.1kHz)
- Dynamics Parameters
- Appendix B: Specifications
- Appendix C: MIDI
- Appendix D: Options
- Index
- DM2000 Block Diagram
- DM2000 Level Diagram
- MIDI Implementation Chart
Editing Plug-ins 245
DM2000 Version 2—Owner’s Manual
Editing Plug-ins
Plug-ins can be edited as follows.
(Make sure the MATRIX SELECT [MATRIX 4] (INSERT BYPASS) button indicator is not
lit before proceeding.)
1 Press the ENCODER MODE [ASSIGN 4] (INSERT) button.
Its indicator lights up and the [SEL] buttons are set to Insert Select mode.
2 Use the [SEL] buttons to select the channel whose plug-in you want to edit.
That channel’s [SEL] button indicator lights up, and the border of the corresponding chan-
nel name in the Pro Tools Mix window is highlighted red. The names of the Plug-ins
inserted in the channel are displayed in the INSERT ASSIGN/EDIT section of the display.
3 Use the Parameter control 1–4 push-switches to select the plug-in that you
want to edit.
Plug-in Edit mode is set and the plug-in’s parameters are displayed in the INSERT
ASSIGN/EDIT section of the display. The EFFECTS/PLUG-INS [8] (INSERT/PARAM)
button indicator lights up and the PARAM indicator on the display appears highlighted.
4 Use Parameter controls 1–4 and their push-switches to edit the displayed
parameters.
Parameters displayed on the top row can be edited by using the push-switches. Parameters
displayed on the bottom row can be edited by using the Parameter controls.
5 Use the Parameter Down (SCROLL >) button and Parameter Up (< SCROLL)
button to select the parameter pages.
When a parameter page is first selected, the number of the current parameter page and the
total number of parameter pages is displayed momentarily. For example, “1/2” indicates
that the first page of two is currently selected. While “3/4” indicates that the third page of
four is currently selected. The title of the plug-in is also displayed.
While editing a plug-in you can bypass it by pressing the EFFECTS/PLUG-INS [7]
(BYPASS) button. In which case, the BYPASS indicator on the display appears highlighted.
As soon as you begin editing a plug-in, the COMPARE indicator on the display appears
highlighted. You can compare your edits with the original settings by pressing the
EFFECTS/PLUG-INS [6] (COMPARE) button. The COMPARE indicator on the display
appears highlighted while the original settings are active, and unhighlighted while your
edits are active.
6 To edit another plug-in, press the EFFECTS/PLUG-INS [8] (INSERT/PARAM)
button (its indicator goes out), use the [SEL] buttons to select the channel
(same as step #2), and use the Parameter control 1–4 push-switches to select
the plug-in (same as step #3).