User Guide
Table Of Contents
- Important Information
- Contents
- 1 Welcome
- 2 Control Surface & Rear Panel
- 3 Operating Basics
- Connecting the Power Cord
- Turning On & Off the DM2000
- About the Display
- Selecting Display Pages
- Display History
- Display Page Controls
- Parameter Windows
- Confirmation Messages
- Title Edit Window
- Using a Keyboard
- Channel Strip Displays
- Selecting Layers
- Selecting Channels
- Selecting Fader Modes
- Selecting Encoder Modes
- Assigning Parameters to the ENCODER MODE Assign Buttons
- 4 Analog I/O & the AD Input Section
- 5 Digital I/O & Cascading
- 6 Input & Output Patching
- 7 Input Channels
- Patching Input Channels
- Metering Input Channels
- Reversing the Signal Phase
- Gating Input Channels
- Attenuating Input Channels
- EQ’ing Input Channels
- Grouping Input Channel EQs
- Input Channel Inserts
- Compressing Input Channels
- Grouping Input Channel Compressors
- Delaying Input Channels
- Muting Input Channels (ON/OFF)
- Grouping Input Channel Mutes (ON/OFF)
- Input Channel Mute Master
- Setting Input Channel Levels
- Grouping Input Channel Faders
- Group Master for Input Channel Faders
- Routing Input Channels
- Panning Input Channels
- Using Surround Pan
- Assigning Surround Channels to Buses
- Sending Input Channels to Aux Sends
- Soloing Input Channels
- Direct Outs
- Pairing Input Channels
- Viewing Input Channel Settings
- Copying Input Channel Settings
- Naming Input Channels
- Using the MS Stereo Microphone
- 8 Stereo Out
- Stereo Out Connectors
- Patching the Stereo Out to Outputs
- Routing Input Channels to the Stereo Out
- Sending Bus Outs to the Stereo Out
- Metering the Stereo Out
- Monitoring the Stereo Out
- Attenuating the Stereo Out
- EQ’ing the Stereo Out
- Grouping Master EQs
- Stereo Out Inserts
- Compressing the Stereo Out
- Grouping Master Compressors
- Muting the Stereo Out (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting the Stereo Out Level
- Grouping Master Faders
- Sending the Stereo Out to the Matrix Sends
- Balancing the Stereo Out
- Delaying the Stereo Out
- Inserting GEQs
- Viewing Stereo Out Settings
- Copying Stereo Out Settings
- Naming the Stereo Out
- 9 Bus Outs
- Patching Bus Outs to Outputs
- Routing Input Channels to Bus Outs
- Metering Bus Outs
- Monitoring Bus Outs
- Attenuating Bus Outs
- EQ’ing Bus Outs
- Grouping Master EQs
- Bus Out Inserts
- Compressing Bus Outs
- Grouping Master Compressors
- Muting Bus Outs (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Bus Out Levels
- Grouping Master Faders
- Sending Bus Outs to Matrix Sends
- Delaying Bus Outs
- Inserting GEQs
- Soloing Bus Outs
- Pairing Bus Outs
- Sending Bus Outs to the Stereo Out
- Viewing Bus Out Settings
- Copying Bus Out Settings
- Naming Bus Outs
- 10 Aux Sends
- Patching Aux Send Masters to Outputs
- Setting the Aux Send Mode
- PreFader or PostFader Aux Sends
- Setting Aux Send Levels
- Muting Aux Sends (ON/OFF)
- Aux Send Pages
- Viewing Aux Send Settings
- Panning Aux Sends
- Excluding Certain Channels from Aux Sends (Mix Minus)
- Copying Channel Fader Positions to Aux Sends
- Metering Aux Send Masters
- Monitoring Aux Send Masters
- Attenuating Aux Send Masters
- EQ’ing Aux Send Masters
- Grouping Master EQs
- Aux Send Master Inserts
- Compressing Aux Send Masters
- Grouping Master Compressors
- Muting Aux Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Settings Aux Send Master Levels
- Grouping Master Faders
- Sending Aux Sends to Matrix Sends
- Delaying Aux Send Masters
- Inserting GEQs
- Soloing Aux Sends
- Pairing Aux Sends
- Viewing Aux Send Master Settings
- Copying Aux Send Master Settings
- Naming Aux Send Masters
- 11 Matrix Sends
- Patching Matrix Send Masters to Outputs
- PreFader or PostFader Matrix Sends
- Setting Matrix Send Levels
- Muting Matrix Sends (ON/OFF)
- Matrix Send Pages
- Panning Matrix Sends
- Viewing Matrix Send Settings
- Metering Matrix Send Masters
- Monitoring Matrix Send Masters
- Attenuating Matrix Send Masters
- EQ’ing Matrix Send Masters
- Grouping Master EQs
- Matrix Send Master Inserts
- Compressing Matrix Send Masters
- Grouping Master Compressors
- Muting Matrix Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Matrix Send Master Levels
- Grouping Master Faders
- Balancing Matrix Send Masters
- Delaying Matrix Send Masters
- Soloing Matrix Sends
- Inserting GEQs
- Viewing Matrix Send Master Settings
- Copying Matrix Send Master Settings
- Naming Matrix Send Masters
- 12 Common Channel Functions
- Metering
- Attenuating Signals
- Using EQ
- Grouping Output Channel EQs
- Using Inserts
- Compressing Channels
- Grouping Output Channel Compressors
- Delaying Channel Signals
- Soloing Channels
- Pairing Channels
- Grouping Output Channel Faders
- Group Master for the Output Channel Faders
- Grouping Output Channel Mutes (ON/OFF)
- Output Channel Mute Master
- Viewing Channel Parameter Settings
- Viewing Channel Fader Settings
- Copying Channel Settings
- Naming Channels
- 13 Monitoring & Talkback
- 14 Libraries
- 15 Internal Effects, PlugIns & GEQs
- 16 Scene Memories
- 17 Automix
- About Automix
- What’s Recorded in an Automix?
- Automix Main Page
- AUTOMIX Section
- Channel Strip [AUTO] Buttons
- Automix Memory Page
- Fader Edit Pages
- Selecting the Timecode Source & Frame Rate
- Creating a Time Signature Map
- Recording an Automix
- Inserting Mix Parameters into Automix
- Rerecording Events
- Parameter Recording
- Punching In & Out Individual Parameters
- Playing Back an Automix
- Editing Events Offline
- 18 MIDI
- 19 Pro Tools Remote Layer
- Configuring Windows Computers
- Configuring Macintosh Computers (MacOS 8.6 to 9.2.2)
- Configuring Macintosh Computer (MacOS X)
- Configuring the DM2000
- Configuring Pro Tools
- Control Surface Operation with the Pro Tools Remote Layer
- Scrolling Windows
- Selecting Channels
- Assigning Inputs to Channels
- Assigning Outputs to Channels
- Setting Channel Levels
- Muting Channels
- Panning Channels
- Soloing Channels
- Assigning Send Destinations
- Configuring Sends as Pre or Post
- Setting Send Levels
- Muting Sends
- Panning Sends
- Flip Mode
- Assigning Inserts/Plugins
- Editing Plugins
- Bypassing Individual Plugins
- Bypassing all Plugins
- Resetting Faders, Sends, Panpots & Plugins
- Navigating the Edit Window
- Zooming
- Making Fine Adjustments to the Selected Region
- Scrub & Shuttle
- Automation
- Panner
- 20 Remote Control
- 21 Other Functions
- Appendix A: Parameter Lists
- USER DEFINED KEYS
- USER DEFINED KEYS Initial Assignments
- Input Patch Parameters
- Initial Input Patch Settings
- Output Patch Parameters
- Initial Output Patch Settings
- Initial Input Channel Names
- Initial Output Channel Names
- Initial Input Port Names
- Initial Output Port Names
- GPI Trigger Source & Target List
- User Defined Remote Layer Initial Bank Settings
- Effects Parameters
- Effects and tempo synchronization
- Preset EQ Parameters
- Preset Gate Parameters (fs = 44.1kHz)
- Preset Compressor Parameters (fs = 44.1kHz)
- Dynamics Parameters
- Appendix B: Specifications
- Appendix C: MIDI
- Appendix D: Options
- Index
- DM2000 Block Diagram
- DM2000 Level Diagram
- MIDI Implementation Chart
376 Appendix C: MIDI
DM2000 Version 2—Owner’s Manual
13.3.24 Effect library bulk dump request format
The second and third bytes of the DATA NAME indicate the library num-
ber. (See above)
13.3.25 GEQ library bulk dump format
The second and third bytes of the DATA NAME indicate the library num-
ber.
0:Library no.0 - 128:Library no.128, 256:GEQ1 - 261:GEQ6, 8192:UNDO
256-261are the data for the corresponding area of the edit buffer.
For reception by the DM2000, only the user area is valid. (1-128, 256-261)
13.3.26 GEQ library bulk dump request format
The second and third bytes of the DATA NAME indicate the library num-
ber. (See above)
13.3.27 Channel library bulk dump format
The second and third bytes of the DATA NAME indicate the library num-
ber.
0:Library no.0 - 128:Library no.128, 256:CH1 - 351:CH96, 384:BUS1 -
391:BUS8, 512:AUX1 - 523:AUX12, 640:MATRIX1L - 647:MATRIX4R,
768:STEREO L - 769:STEREO R, 8192:UNDO
256 and following are data for the corresponding channel of the edit buff-
er. For reception by the DM2000, only the user area is valid. (2-128,256-)
13.3.28 Channel library bulk dump request format
The second and third bytes of the DATA NAME indicate the library num-
ber. (See above)
BLOCK INFO. 0ttttttt tt
total block number (minimum number
is 0)
0bbbbbbb bb
current block number (0-total block
number)
DATA 0ddddddd ds
Effect Library data of block[bb]
:
:
0ddddddd de
CHECK SUM 0eeeeeee ee
ee= (Invert ('L'+...+de)+1)&0x7F
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0010nnnn 2n
n=0-15 (Device number=MIDI Channel)
FORMAT No. 01111110 7E
Universal bulk dump
01001100 4C
'L'
01001101 4D
'M'
00100000 20
' '
00100000 20
' '
00111000 38
'8'
01000011 43
'C'
00110001 31
'1'
00110010 32
'2'
DATA NAME 01000101 45
'E'
0mmmmmmm mh
0-127 (Effect Library no.1-128),
0mmmmmmm ml
256-259 (Effect1-8 current)
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0000nnnn 0n
n=0-15 (Device number=MIDI Channel)
FORMAT No. 01111110 7E
Universal bulk dump
COUNT HIGH 0ccccccc ch
data count = ch * 128 + cl
COUNT LOW 0ccccccc cl
01001100 4C
'L'
01001101 4D
'M'
00100000 20
' '
00100000 20
' '
00111000 38
'8'
01000011 43
'C'
00110001 31
'1'
00110010 32
'2'
DATA NAME 01000110 46
'F'
0mmmmmmm mh
0-128 (GEQ Library no.0-128),
0mmmmmmm ml
256-261 (GEQ1-6 current)
BLOCK INFO. 0ttttttt tt
total block number (minimum number
is 0)
0bbbbbbb bb
current block number (0-total block
number)
DATA 0ddddddd ds
GEQ Library data of block[bb]
:
:
0ddddddd de
CHECK SUM 0eeeeeee ee
ee= (Invert ('L'+...+de)+1)&0x7F
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0010nnnn 2n
n=0-15 (Device number=MIDI Channel)
FORMAT No. 01111110 7E
Universal bulk dump
01001100 4C
'L'
01001101 4D
'M'
00100000 20
' '
00100000 20
' '
00111000 38
'8'
01000011 43
'C'
00110001 31
'1'
00110010 32
'2'
DATA NAME 01000110 46
'F'
0mmmmmmm mh
0-128 (GEQ Library no.0-128),
0mmmmmmm ml
256-261 (GEQ1-6 current)
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0000nnnn 0n
n=0-15 (Device number=MIDI Channel)
FORMAT No. 01111110 7E
Universal bulk dump
COUNT HIGH 0ccccccc ch
data count = ch * 128 + cl
COUNT LOW 0ccccccc cl
01001100 4C
'L'
01001101 4D
'M'
00100000 20
' '
00100000 20
' '
00111000 38
'8'
01000011 43
'C'
00110001 31
'1'
00110010 32
'2'
DATA NAME 01001000 48
'H'
0mmmmmmm mh
0-128 (Channel Library no.0-128),
0mmmmmmm ml
256- (Current data)
BLOCK INFO. 0ttttttt tt
total block number (minimum number
is 0)
0bbbbbbb bb
current block number (0-total block
number)
DATA 0ddddddd ds
Channel Library data of block[bb]
:
:
0ddddddd de
CHECK SUM 0eeeeeee ee
ee= (Invert ('L'+...+de)+1)&0x7F
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0010nnnn 2n
n=0-15 (Device number=MIDI Channel)
FORMAT No. 01111110 7E
Universal bulk dump
01001100 4C
'L'
01001101 4D
'M'
00100000 20
' '
00100000 20
' '
00111000 38
'8'
01000011 43
'C'
00110001 31
'1'
00110010 32
'2'
DATA NAME 01001000 48
'H'
0mmmmmmm mh
0-128 (Channel Library no.0-128),
0mmmmmmm ml
256- (Current data)
EOX 11110111 F7
End of exclusive