User Guide
Table Of Contents
- Important Information
- Contents
- 1 Welcome
- 2 Control Surface & Rear Panel
- 3 Operating Basics
- Connecting the Power Cord
- Turning On & Off the DM2000
- About the Display
- Selecting Display Pages
- Display History
- Display Page Controls
- Parameter Windows
- Confirmation Messages
- Title Edit Window
- Using a Keyboard
- Channel Strip Displays
- Selecting Layers
- Selecting Channels
- Selecting Fader Modes
- Selecting Encoder Modes
- Assigning Parameters to the ENCODER MODE Assign Buttons
- 4 Analog I/O & the AD Input Section
- 5 Digital I/O & Cascading
- 6 Input & Output Patching
- 7 Input Channels
- Patching Input Channels
- Metering Input Channels
- Reversing the Signal Phase
- Gating Input Channels
- Attenuating Input Channels
- EQ’ing Input Channels
- Grouping Input Channel EQs
- Input Channel Inserts
- Compressing Input Channels
- Grouping Input Channel Compressors
- Delaying Input Channels
- Muting Input Channels (ON/OFF)
- Grouping Input Channel Mutes (ON/OFF)
- Input Channel Mute Master
- Setting Input Channel Levels
- Grouping Input Channel Faders
- Group Master for Input Channel Faders
- Routing Input Channels
- Panning Input Channels
- Using Surround Pan
- Assigning Surround Channels to Buses
- Sending Input Channels to Aux Sends
- Soloing Input Channels
- Direct Outs
- Pairing Input Channels
- Viewing Input Channel Settings
- Copying Input Channel Settings
- Naming Input Channels
- Using the MS Stereo Microphone
- 8 Stereo Out
- Stereo Out Connectors
- Patching the Stereo Out to Outputs
- Routing Input Channels to the Stereo Out
- Sending Bus Outs to the Stereo Out
- Metering the Stereo Out
- Monitoring the Stereo Out
- Attenuating the Stereo Out
- EQ’ing the Stereo Out
- Grouping Master EQs
- Stereo Out Inserts
- Compressing the Stereo Out
- Grouping Master Compressors
- Muting the Stereo Out (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting the Stereo Out Level
- Grouping Master Faders
- Sending the Stereo Out to the Matrix Sends
- Balancing the Stereo Out
- Delaying the Stereo Out
- Inserting GEQs
- Viewing Stereo Out Settings
- Copying Stereo Out Settings
- Naming the Stereo Out
- 9 Bus Outs
- Patching Bus Outs to Outputs
- Routing Input Channels to Bus Outs
- Metering Bus Outs
- Monitoring Bus Outs
- Attenuating Bus Outs
- EQ’ing Bus Outs
- Grouping Master EQs
- Bus Out Inserts
- Compressing Bus Outs
- Grouping Master Compressors
- Muting Bus Outs (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Bus Out Levels
- Grouping Master Faders
- Sending Bus Outs to Matrix Sends
- Delaying Bus Outs
- Inserting GEQs
- Soloing Bus Outs
- Pairing Bus Outs
- Sending Bus Outs to the Stereo Out
- Viewing Bus Out Settings
- Copying Bus Out Settings
- Naming Bus Outs
- 10 Aux Sends
- Patching Aux Send Masters to Outputs
- Setting the Aux Send Mode
- PreFader or PostFader Aux Sends
- Setting Aux Send Levels
- Muting Aux Sends (ON/OFF)
- Aux Send Pages
- Viewing Aux Send Settings
- Panning Aux Sends
- Excluding Certain Channels from Aux Sends (Mix Minus)
- Copying Channel Fader Positions to Aux Sends
- Metering Aux Send Masters
- Monitoring Aux Send Masters
- Attenuating Aux Send Masters
- EQ’ing Aux Send Masters
- Grouping Master EQs
- Aux Send Master Inserts
- Compressing Aux Send Masters
- Grouping Master Compressors
- Muting Aux Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Settings Aux Send Master Levels
- Grouping Master Faders
- Sending Aux Sends to Matrix Sends
- Delaying Aux Send Masters
- Inserting GEQs
- Soloing Aux Sends
- Pairing Aux Sends
- Viewing Aux Send Master Settings
- Copying Aux Send Master Settings
- Naming Aux Send Masters
- 11 Matrix Sends
- Patching Matrix Send Masters to Outputs
- PreFader or PostFader Matrix Sends
- Setting Matrix Send Levels
- Muting Matrix Sends (ON/OFF)
- Matrix Send Pages
- Panning Matrix Sends
- Viewing Matrix Send Settings
- Metering Matrix Send Masters
- Monitoring Matrix Send Masters
- Attenuating Matrix Send Masters
- EQ’ing Matrix Send Masters
- Grouping Master EQs
- Matrix Send Master Inserts
- Compressing Matrix Send Masters
- Grouping Master Compressors
- Muting Matrix Send Masters (ON/OFF)
- Grouping Master Mutes (ON/OFF)
- Setting Matrix Send Master Levels
- Grouping Master Faders
- Balancing Matrix Send Masters
- Delaying Matrix Send Masters
- Soloing Matrix Sends
- Inserting GEQs
- Viewing Matrix Send Master Settings
- Copying Matrix Send Master Settings
- Naming Matrix Send Masters
- 12 Common Channel Functions
- Metering
- Attenuating Signals
- Using EQ
- Grouping Output Channel EQs
- Using Inserts
- Compressing Channels
- Grouping Output Channel Compressors
- Delaying Channel Signals
- Soloing Channels
- Pairing Channels
- Grouping Output Channel Faders
- Group Master for the Output Channel Faders
- Grouping Output Channel Mutes (ON/OFF)
- Output Channel Mute Master
- Viewing Channel Parameter Settings
- Viewing Channel Fader Settings
- Copying Channel Settings
- Naming Channels
- 13 Monitoring & Talkback
- 14 Libraries
- 15 Internal Effects, PlugIns & GEQs
- 16 Scene Memories
- 17 Automix
- About Automix
- What’s Recorded in an Automix?
- Automix Main Page
- AUTOMIX Section
- Channel Strip [AUTO] Buttons
- Automix Memory Page
- Fader Edit Pages
- Selecting the Timecode Source & Frame Rate
- Creating a Time Signature Map
- Recording an Automix
- Inserting Mix Parameters into Automix
- Rerecording Events
- Parameter Recording
- Punching In & Out Individual Parameters
- Playing Back an Automix
- Editing Events Offline
- 18 MIDI
- 19 Pro Tools Remote Layer
- Configuring Windows Computers
- Configuring Macintosh Computers (MacOS 8.6 to 9.2.2)
- Configuring Macintosh Computer (MacOS X)
- Configuring the DM2000
- Configuring Pro Tools
- Control Surface Operation with the Pro Tools Remote Layer
- Scrolling Windows
- Selecting Channels
- Assigning Inputs to Channels
- Assigning Outputs to Channels
- Setting Channel Levels
- Muting Channels
- Panning Channels
- Soloing Channels
- Assigning Send Destinations
- Configuring Sends as Pre or Post
- Setting Send Levels
- Muting Sends
- Panning Sends
- Flip Mode
- Assigning Inserts/Plugins
- Editing Plugins
- Bypassing Individual Plugins
- Bypassing all Plugins
- Resetting Faders, Sends, Panpots & Plugins
- Navigating the Edit Window
- Zooming
- Making Fine Adjustments to the Selected Region
- Scrub & Shuttle
- Automation
- Panner
- 20 Remote Control
- 21 Other Functions
- Appendix A: Parameter Lists
- USER DEFINED KEYS
- USER DEFINED KEYS Initial Assignments
- Input Patch Parameters
- Initial Input Patch Settings
- Output Patch Parameters
- Initial Output Patch Settings
- Initial Input Channel Names
- Initial Output Channel Names
- Initial Input Port Names
- Initial Output Port Names
- GPI Trigger Source & Target List
- User Defined Remote Layer Initial Bank Settings
- Effects Parameters
- Effects and tempo synchronization
- Preset EQ Parameters
- Preset Gate Parameters (fs = 44.1kHz)
- Preset Compressor Parameters (fs = 44.1kHz)
- Dynamics Parameters
- Appendix B: Specifications
- Appendix C: MIDI
- Appendix D: Options
- Index
- DM2000 Block Diagram
- DM2000 Level Diagram
- MIDI Implementation Chart
84 Chapter 7—Input Channels
DM2000 Version 2—Owner’s Manual
7 Input Channels
Patching Input Channels
AD Inputs, Slot Inputs, internal effects processor outputs, Digital or Analog 2TR Inputs,
Bus Outs, or Aux Sends can be patched to the Input Channel Inputs. See “Patching Input
Channels” on page 77 for more information.
Metering Input Channels
Input Channel signal levels can be metered on the Meter pages. See “Metering” on page 127
for more information.
Reversing the Signal Phase
The signal phase of each Input Channel can be reversed as follows.
Using the SELECTED CHANNEL PHASE/INSERT [ ] Button
1 Use the LAYER buttons to select Input Channel Layers, and use the [SEL] but-
tons to select Input Channels.
2 Use the Phase [ ] button to set the phase.
Phase is reversed when the Phase [ ] button indicator is lit.
Phase Pages
Phase settings can be viewed and set on the Phase pages. If the Auto PHASE/INSERT Dis-
play preference is on, these pages appear automatically when you press the Phase [ ] button
in the SELECTED CHANNEL PHASE/INSERT section, turning on the button indicator.
See “Auto PHASE/INSERT Display” on page 274.
1 Use the SELECTED CHANNEL PHASE/INSERT [DISPLAY] button to select the
Phase pages.
The Phase parameters for the 96 Input Channels are divided between two pages. The Input
Channel 1–48 Phase page is shown below. The layout of the other page is the same.
2 Use the cursor buttons or Parameter wheel to select the NOR/REV buttons,
then use the [ENTER] button and INC/DEC buttons to set them.
The NOR/REV buttons can also be selected by using the [SEL] buttons.
GLOBAL NOR/REV: These buttons allow you to set the phase of all Input Channels
simultaneously.