User Manual

Delay Plug-ins
MonoDelay
This is a mono delay effect. The delay line uses either tempo-based or freely specified delay time settings.
LO FILTER
Affects the feedback loop of the effect signal and allows you to roll off low frequencies. The button below
the knob activates/deactivates the filter.
HI FILTER
Affects the feedback loop of the effect signal and allows you to roll off high frequencies. The button
below the knob activates/deactivates the filter.
DELAY
Sets the delay time in milliseconds.
SYNC
Activates/Deactivates tempo sync.
FEEDBACK
Sets the amount of the signal that is sent back into the delay input. The higher this value, the higher the
number of repeats.
MIX
Sets the level balance between the dry signal and the wet signal. If the effect is used as a send effect, set
this parameter to the maximum value, as you can control the dry/effect balance with the send level.
Delay Plug-ins
4 | VST Rack Elements V1.5 Plug-in Reference