User Manual

StereoDelay
This is a stereo delay effect that includes two independent delay effects. It can either be tempo-based or use
freely specified delay time settings.

This plug-in works only on stereo racks.
FEEDBACK
Sets the number of repeats for each delay.
DELAY
Sets the delay time in milliseconds.
SYNC
Activates/Deactivates tempo sync for the corresponding delay.
MIX
Sets the level balance between the dry signal and the wet signal. If the effect is used as a send effect, set
this parameter to the maximum value, as you can control the dry/effect balance with the send level.
LO FILTER
Affects the feedback loop of the effect signal and allows you to roll off low frequencies. The button below
the knob activates/deactivates the filter.
PAN
Sets the stereo position.
HI FILTER
Affects the feedback loop of the effect signal and allows you to roll off high frequencies. The button
below the knob activates/deactivates the filter.
Delay Plug-ins
VST Rack Elements V1.5 Plug-in Reference | 5