User Manual

DM3/DM3 Standard Firmware Update Guide 7
■ If the Dante module update failed
The Dante module may become unusable due to data corruption if the DM3 is powered-off during
a firmware update. To recover from such a state, the Dante module will enter "failsafe mode."
If the Dante module could boot in the failsafe mode, you can recover it to send a recovery image
from the Dante Updater.
Confirming the Dante module firmware corruption
If the Dante module firmware is corrupt, the Dante version is displayed as “------ ------- -----” in
the ABOUT screen of the DM3.
When the Dante module is booted in the failsafe mode, the Dante module in failsafe mode is
shown as “BROOKLYN3-xxxxxx” with red text in the network grid view of Dante Controller. In
this case, use the Dante Updater that comes with Dante Controller to restore the Dante module
and import and update the latest Dante firmware.
For details, refer to “Fail-Safe Mode” in the Dante Firmware Update Guide (yamaha.com).