User Manual

DYN1 screen
The DYN1 screen opens when you tap the DYN1 button in the TOOLBAR area.
Allows you to configure the noise gate for each channel. When the input signal level is lower than the
threshold, the output signal is reduced by a specified amount (RANGE). DYN1 is equipped for CH 1–16, STIN,
and FX RTN channels.
f g h ji m n o
a b c
d e
k l
a
DYN1 button
Turns the DYN1 function ON and OFF.
b
Type selection button
Selects either GATE or DUCKING.
c
Key In selection button
Select the Key In signal from the following.
(
Self Pre EQ
(
Self Post EQ
(
Other Ch
(
Mix
65
Controls and functions > Channel-specific screens