User Manual

d
Key In channel selection button
It is enabled when Other Ch or Mix are selected by the Key In selection button.
When Other Ch is selected, select from CH1-16 Post EQ.
When Mix is selected, select from Mix Out 1-6.
e
CUE button
Turns the Key In signal CUE ON/OFF.
f
DYN1 Key In level meter
Displays the Key In input level.
g
DYN1 input level meter
Displays the DYN1 input level.
h
Threshold slider
Determines the level at which the GATE/DUCKING effect is applied.
i
GATE/DUCKING graph
Displays a visual representation of the GATE/DUCKING level.
j
Range slider
Determines the amount by which the signal will be lowered when GATE/DUCKING is applied.
k
Attack slider
When the input signal exceeds the threshold, this setting determines how quickly the gate opens.
l
Hold slider
When the input signal drops below the threshold, this setting determines how much time passes before the gate
closes.
m
Decay slider
After the HOLD time of the input signal passes, this setting determines how quickly the gate closes. The setting value
expresses the time required for the level to change by 6 dB.
n
GR (gain reduction) meter
Displays the amount by which the signal's gain is reduced.
o
OUT (output) meter
Displays the GATE/DUCKING output level.
DYN1 screen menu
The following items are available in the DYN1 screen's context menu.
(
Copy:
Copies the DYN1 parameters of the selected channel to the copy buffer.
(
Paste:
Pastes the DYN1 parameters saved in the copy buffer to the selected channel.
66
Controls and functions > Channel-specific screens