User Manual

e
Key In selection button
Select the Key In signal from the following.
(
Self Pre EQ
(
Self Post EQ
f
Key In level meter
Displays the Key In input level.
g
DYN2 input level meter
Displays input level to DYN2.
h
Threshold slider
Sets the level at which the compressor is applied.
i
Compressor graph
Displays a visual representation of the current settings.
j
Ratio slider
Determines the amount of compression that is applied.
k
Release slider
This sets the time from when the input signal drops below the value set by the Threshold slider until the compressor
effect disappears. The value here is expressed as the time required for the level to change by 6 dB.
l
Knee button
Determines the how gradual or sharp the curve is at the threshold. With Soft the compressor is applied smoothly,
with Hard, rapidly.
m
Out Gain slider
Adjusts the output level of the compressor.
n
GR (gain reduction) meter
Displays the amount by which the signal's gain is reduced.
o
OUT (compressor output) meter
Displays the compressor output level.
DYN2 screen menu
The following items are available in the DYN2 screen's context menu.
(
Copy:
Copies the DYN2 parameters of the selected channel to the copy buffer.
(
Paste:
Pastes the DYN2 parameters saved in the copy buffer to the selected channel.
(
Compare:
Allows you to compare the DYN2 parameters of the selected channel with the DYN2 parameters in the
copy buffer by switching between the two.
69
Controls and functions > Channel-specific screens