User Manual

d
a
SEND ON button
Determines whether a signal is sent (on) or not sent (off) to the MIX/MATRIX bus.
b
SEND LEVEL slider
Adjusts the amount of signal sent to the MIX/MATRIX buses.
c
PRE button
Selects whether the signal sent to the MIX/MATRIX buses is sent before or after the fader.
(
ON:
Before the fader
(
OFF:
After the fader
When set to ON, you can select before EQ or before fader with the Pre Fader Send Point on the BUS SETUP screen of
the DM3 Series console.
d
SEND PAN slider
Displayed when the MIX/MATRIX bus sending destination is stereo. It adjusts the sending pan.
72
Controls and functions > Channel-specific screens