User Manual

c
Frequency characteristics, RTA display, gain controllable band selection
Displays the parameter characteristics/RTA.
When tapped, the gain slider is displayed in the center of the tapped frequency.
While operating the gain slider, the point being operated is highlighted in pink.
d
Gain slider
Sliding the handle up/down adjusts the gain. The gain value is displayed above the handle.
Double-tap a handle to set the gain to 0 dB.
Swiping left or right anywhere except the handle switches the display to a gain adjustable band.
e
Output level meter
Displays the GEQ output signal level.
f
Available bands display
Displays the number of unused bands whose gain can be adjusted.
g
Hold button
When turned on, it displays the peak value within the RTA display. You can change how it is displayed by changing the
Peak Hold Mode settings on the PREFERENCE screen.
GEQ screen menu
The following items are available in the GEQ screen's context menu.
(
Copy:
Copies the GEQ parameters of the selected channel to the copy buffer.
(
Paste:
Pastes the GEQ parameters saved in the copy buffer to the selected channel.
(
Compare:
Allows you to compare the GEQ parameters of the selected channel with the GEQ parameters in the copy
buffer by switching between the two.
(
Default:
Resets GEQ settings to their default values.
74
Controls and functions > Channel-specific screens