User Manual

DM3 Series Network Settings
The DM3 Series network settings can be auto-configured via DHCP or configured manually. To make the
settings manually or to connect via an existing, shared network, set the system to the LAN to connect to. For
more information, consult with the administrator of the LAN.
DM3 Series network settings
To make DM3 Series network settings, go to the SETUP screen → NETWORK (For Mixer Control) screen.
(
IP Address:
Configure so it does not overlap with the addresses of other network devices.
(
Subnet Mask:
Set to the subnet mask of the subnet to which the DM3 Series console is connected.
(
Gateway:
If a gateway exists, set to the IP address of the gateway. If no gateway exists, set to a free IP address. If a
subnet is assigned within the LAN, then set within the same subnet as the IP address.
(
Unit Name:
Specify the name to be displayed in the network.
9
Preparation > DM3 Series Network Settings