User Manual

Computer network settings
The DM3 Series network settings can be auto-configured via DHCP or configured manually. To make the
settings manually or to connect via an existing, shared network, set the system in accordance with the LAN
to be connected to. For more information, consult with the administrator of the LAN. Details and precautions
regarding network connections are available at the URL below.
http://www.yamahaproaudio.com/
Computer TCP/IP settings
To make the settings manually or to connect via an existing, shared network, configure the TCP/IP settings
on your computer. Make the following settings.
1 Navigate as follows: [Control Panel] → [Network and Sharing Center] or click or
double click [View Network Status and Tasks].
The “Network and Sharing Center” is displayed.
2 Click [Manage Network Connections] or [Change adaptor settings] from the “Task”
list to the left of [Network and Sharing Center], and double-click [Local Area
Connection].
The “Local Area Connection Status” dialog box is displayed.
If the “Local Area Connection Properties” dialog box is displayed, continue from step 4.
3 Click [Properties].
The “Local Area Connection Properties” dialog box is displayed.
4 Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties] button.
The “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog box is displayed.
5 Click [Use the following IP address (S)].
6 Enter the IP address of the computer in [IP address], the gateway IP address in
[Default gateway] and the subnet mask in [Subnet mask].
To connect to an existing network, ask your network administrator for the LAN setup details.
7 Click [OK].
8 Restart the computer.
NOTE
If the “User Account Control” dialog appears during the setup process, click the [Continue] button.
11
Windows > Computer network settings