User Manual

Computer network settings
The DM3 Series network settings can be auto-configured via DHCP or configured manually. To make the
settings manually or to connect via an existing, shared network, set the system in accordance with the LAN
to be connected to. For more information, consult with the administrator of the LAN. Details and precautions
regarding network connections are available at the URL below.
https://www.yamahaproaudio.com/
Computer TCP/IP settings
To make the settings manually or to connect via an existing, shared network, configure the TCP/IP settings
on your computer. Make the following settings.
1 Click the [System Preferences] icon in the Dock.
The “System Preferences” window appears.
2 Click the [Network] icon.
The “Network” window opens.
3 Click [Ethernet].
The Ethernet screen appears. If there are multiple Ethernet choices, select the Ethernet the
computer is connected to.
4 Select [Manually] in [Configure IPv4] or [Configuration]. Enter the computer IP
Address in [IP Address], the subnet mask of the subnet in [Subnet Mask], and the IP
address of the router (gateway) in [Router].
To connect to an existing network, ask your network administrator for the LAN setup details.
5 Click [Apply].
The network settings are applied.
14
Mac > Computer network settings