User Manual

DM3 Series console settings
The DM3 Series network settings can be auto-configured via DHCP or configured manually. To make the
settings manually or to connect via an existing, shared network, set the system to the LAN to connect to. For
more information, consult with the administrator of the LAN. Details and precautions regarding network
connections are available at the URL below.
https://www.yamahaproaudio.com/
DM3 Series console network settings
To make DM3 Series network settings, go to the SETUP screen → NETWORK (For Mixer Control) screen.
IP address Configure so it does not overlap with the addresses of other network devices.
Subnet mask Set to the subnet mask of the subnet to which the DM3 Series console is connected.
Gateway
If a gateway exists, set to the IP address of the gateway. If no gateway exists, use a free
IP address. If a subnet is assigned within the LAN, then set within the same subnet as
the IP address.
18
Console connections and settings > DM3 Series console settings