Owner's Manual

Chapter 5 Components
DME Designer Owner’s Manual
350
 “Color Frame Properties” Dialog Box
The Color Frame Properties dialog box will appear when you right-click a solid frame and select
[Properties] from the contextual menu. Here you can enter the text to be displayed. Here you can
set the frame size and divider location.
Frame Size
The width is set using the [Width] and the height is set using [Height]. The units are pixels and the
minimum value is 3.
Line Width
Sets the thickness of the lines at [Top]/[Left]/[Right]/[Bottom]. Set “0” to display no lines.
Frame Color
Sets the color of the color frame.
Click this button to display the “Select color” dialog box. For information about the “Select color”
dialog box, see page 265.
Fill Color
Sets the frame fill color.
Click the [Select Color] button to display the “Select color” dialog box. Refer to “Select Color”
Dialog Box in the Object section on page 265 for information on this dialog box.
Arrows
Specifies the shape of line endpoints (terminals).
The [Left] and [Right] endpoints of [Top Line] and [Bottom Line] lines, and the [Top] and [Bottom]
endpoints of [Left Line] and [Right Line] lines, can be set independently.
None: No endpoint shape.
Arrow: Arrow-shaped endpoint.
Circle: Circle-shaped endpoint.
NOTE
You can change the size of a frame by dragging one of the marks at the four corners (top, bottom, left, right) of the frame
in the user control editor.