Owner`s manual

DME Setup Manual 20



Connecting to External Controllers

ICP1, CP4SF, CP1SF, and CP4SW controllers are available as optional extras for remote external control of

the DME units. For details regarding installation of a control panel and connection to the DME unit, please

refer to the owner’s manual that came with the control panel.

Connection via Ethernet

Intelligent Control Panel ICP1

Connection via General Purpose Interface (GPI)

Control Panel CP4SF, CP1SF, or CP4SW

In-depth Information on DME Units

Tips

Check Input Signals via the GPI Page

Signals received at the GPI IN terminals can be monitored in real time via the Utility screen GPI page on the

DME64N/24N control panel display, or via the DME Designer Utility dialog box GPI monitor. If the DME unit is not

responding properly even though the appropriate signals are being received at the GPI IN terminals, there may be

a problem with the DME settings. If there is no problem with the DME settings there may be a problem with the

DME unit itself.

Maximum length of GPI cables

CPEV cables with a core diameter of 0.65 mm or more can be used over distances of up to 100 m.