Owner`s manual

Basic Setup
DME Setup Manual 8
In response to this action, the Device Group and Sampling Frequency Settings window will be displayed.
Click the [OK] button to proceed.
n Group settings are not necessary when only one DME unit is connected. The sampling rate can be changed later on.
2 Mini-YGDAI Card Settings (DME64N/24N only)
The following settings are used only when one or more Mini-YGDAI cards are installed in a DME24N or DME64N.
If this is not the case, proceed to Step (3. Component Layout and Connection) below.
2-1 With the Mini-YGDAI card already inserted into the DME unit, right-click on the
corresponding DME icon and select [Properties…] from the bottom of the menu
displayed.
2-2 In the DME Device Properties window that is displayed, select the currently-inserted
expansion card as shown below and click the [OK] button.
Right-click  [Properties...]