User Manual
Chapter 4 Designer
DME Designer Owner’s Manual
214
[OK] Button
Updates the settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
“Cascade Setting” Dialog Box Setting Chart
* When a cascade connected PM5D is set up to send the slot output signals via its CASCADE OUT terminal.
■ Edit Port Label and Type Dialog Box
The Edit Port Label and Type dialog box will appear when the [Edit Port Label and Type] button is
clicked. Specifies the port labels and types to be displayed to the left and right of DME and
SP2060 objects.
To set labels enter the [Port Name] for [Left] and [Right]. Each name can be up to 100 characters in
length.
To set the port type use [Port Type] to select the [Left] and [Right] types.
Cascade Destination
DME64N
Only
PM5D/DM2000 CASCADE
Bus
PM5D Slot Output*
Head Margin
-18 dB
(automatic)
-18 dB 0 dB
Mixer I/O
OFF ON OFF ON OFF
Signal
Direction
2, 3
Always
Bidirectional
Unidirectional Bidirectional Unidirectional Bidirectional
1, 4
— Always Unidirectional Always Unidirectional
12
4
3
Mixer
CASCADE OUT
DME64N #1
CASCADE OUT
CASCADE IN
Mixer
CASCADE IN
DME64N #3
CASCADE OUT
CASCADE IN
DME64N #2
CASCADE OUT
CASCADE IN