User Manual

Chapter 5 Components
DME Designer Owner’s Manual
339
■ “Solid Frame Properties” Dialog Box
The Solid Frame Properties dialog box will appear when you right-click a solid frame and select
[Properties] from the contextual menu. Here you can enter the text to be displayed. Here you can
set the frame size and divider location.
Frame Size
The width is set using the [Width] and the height is set using [Height]. The units are pixels.
Partition Line/Sub-Partition Line
Sets partition lines within the frame. [Partition Line] is a long partition line displayed from end to
end, and [Sub-Partition Line] is a short partition line.
• [Direction]
Select the direction of a partition line from the list. [Vertical] inserts a vertical partition line and
[Horizontal] inserts a horizontal partition line. When [None] is select, partition lines are not
displayed.
•[Position]
Displays the currently set line position. Displays the number of pixels from the top of the solid
frame when [Vertical] is selected for the [Direction], and the number of pixels from the left of
the solid frame when [Horizontal] is selected.
• [Add] Button
If you set the position of the partition line in the box on the right and click the [Add] button, the
partition line will be added and displayed in the [Position] list.
• [Delete] Button
Deletes the partition line selected in the [Position] list.
NOTE
You can change the size of a frame by dragging one of the marks at the four corners (top, bottom, left, right) of the frame
in the user control editor.
NOTE
You can change the position of a partition line by dragging one of the marks on the line in the user control editor.
Partition Line
Sub-Partition Line