User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
380
■ Delay
When you click the [Delay] button for the crossover processor, it opens the delay editor window.
Here you can set the delay for each frequency band.
Parameter Setting Range Function
1 Delay ms: 0 to 500
Sample: the range
depends on the Fs value.
Meter: 0 to 171.8
Feet: 0 to 563.6
Frame: the range depends
on the Frame value.
Beat: the range depends
on the Beat value.
Sets the delay time.
2 Level -∞ to ±0 dB Sets the output signal level for each channel
3 On ON/OFF Turns delay ON.
4 Mute ON/OFF Mutes the signal for each frequency band.
5 Delay Scale ms
Sample
Meter
Feet
Frame
Beat
Selects the units for setting the delay time. The
selected button will light up, and the units in the [Delay]
edit box will change.
If [Beat] is selected, use the knob to set the BPM
(beats/minute).
NOTE
Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on page 90 for information on parameter
linking.
1
2
3
5
4
[C
rossover
P
rocessor -
D
e
l
ay
]
e
di
tor w
i
n
d
ow