User Manual

Chapter 6 Component Guide

DME Designer Owner’s Manual

386

■ Delay

When you click the [Delay] button for the crossover processor, it opens the delay editor window.

Here you can set the delay for each frequency band.

Parameter Setting Range Function

1 Delay ms: 0 to 500

Sample: the range depends on the Fs value.

Meter: 0 to 171.8

Feet: 0 to 563.6

Frame: the range depends on the Frame value.

Beat: the range depends on the Beat value.

Sets the delay time.

2 Level -∞ to ±0 dB Sets the output signal level for each

channel.

3 On ON/OFF Turns delay ON.

4 Delay Scale ms

Sample

Meter

Feet

Frame

Beat

Selects the units for setting the delay

time. The selected button will light up,

and the units in the [Delay] edit box

will change.

If [Beat] is selected, use the knob to

set the BPM (beats/minute).

NOTE

Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on page 90 for information on parameter

linking.