User Manual

ManualsBrandsYamaha ManualsProfessional AudioDigital Mixing Engine Satellite

Getting Started

DME Designer Owner’s Manual

Main Changes from V1.0 to V1.1

■ Main Panel Window

• Instead of the former Parameter Link function, there are now two functions: a Global Link function

that links parameters within all DMEs in a zone and a Local Link function that links parameters

within a single DME unit. (page 81)

• The Synchronization function can now not only send data from DME Designer to the DME unit,

but can also synchronize by reading data from the DME unit. (page 83)

• Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input

function. (page 98)

• DME unit events can now be recorded by the Event Logger function and displayed in the Event

Logger window. (page 154)

• The time for executing an event can now be set by using the Event Scheduler function.

(page 125)

• Parameters in the current conﬁguration can now be listed on the display and printed out by using

the Parameter List function. ( page 126)

• The Wav File Manager can manage Wave ﬁles played by the Wav File Player. (page 130)

• Settings can be made by the DAW Control function that are used for controlling DMEs from a

DAW controller. (page 137)

• DME unit data can now be saved as a backup ﬁle by using the Backup function. (page 137)

■ Designer Window

• The port name display can now be switched between long name display and short name display.

(page 179)

• DME64N cascade connections can now be set. (page 195)

• Priority items can now be set when compiling conﬁgurations by using the [Compile Priority]

function in the “Preferences” dialog box. (page 195)

• Delay time can now be displayed for each component by using the Show Signal Delay function.

(page 281)

• Monitoring points can now be edited by using the “Monitoring Point List” dialog box.

(page 282)

• The status of connections in a conﬁguration can now be analyzed in advance by using the

Analyze function, without connecting the DME unit. (page 284)

•You can now set the action that occurs when you double-click a user module object. You can also

turn user module security ON or OFF, and set a password. (page 286)

• Libraries with component parameters saved in them can now be recalled from the context menu

for a component object. (page 339)

•A new rule for wiring prohibits connections to terminals that would short the terminator.

■ Component Editor/Component

•A status bar has been added to the component editor. It displays the component name,

component ID, and parameter IDs for parameters that are being edited. (page 295)

•A Snap function has been added that records parameters in the editor temporarily. Parameter

sets can then be switched by using the Snap buttons. (page 335)

• The meter's peak hold function can now be turned ON or OFF. (page 332)

•A Wav File Player component has been added for playing Wave ﬁles. (page 398)

• An effect component called SPX has been added that supports many different effect

applications, such as reverb, delay, and modulation effects, along with complex combinations of

multiple effects. (page 435)

•A Slot Out component editor has been added. (page 447)