User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
135
MIDI Port Setup
Click the [Port] item in the [Setup] menu to open the “Port” window. In this window you can set the
MIDI port of the master current device to be used by the DME Designer.
“Port” Dialog Box
Selects the MIDI driver used for transmitting and receiving MIDI messages.
[Tx]
Selects, from a list, the MIDI driver used for transmitting MIDI messages.
[Rx]
Selects, from a list, the MIDI driver used for receiving MIDI messages.
[Group]
Select the device group to be set up from the list.
NOTE
Only USB 1 is available on DME8i-C/DME8o-C/DME4io-C.