User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

146

■ Master ID

If the DME or SP2060 unit connected to the port speciﬁed by Port Select is a slave device, the

fourth octet of the of the device group master IP address is displayed and can be edited here. This

parameter is display only if the device is the device group master.

■ Link Mode

Displays and sets the link mode of the DME or SP2060 unit connected to the port speciﬁed by Port

Select.

■ MAC Address

Displays the MAC address of the DME or SP2060 unit connected to the port speciﬁed by Port

Select.

Utility

Click the [Utility] item of the [Hardware] menu to open the “Utility” window.

“Utility” Window

This window provides a variety of utility settings for DME and SP2060 units. These settings can only be

made when the target unit is online. A password will be required to open this window if the DME64N/

24N Utility screen is locked.

Names and Functions

Device Select Field

Select the DME or SP2060 to be displayed or edited from the list.

NOTE

Only users with security status in which [Edit] is checked can edit Utility parameters.