User Manual

Chapter 4 Designer

DME Designer Owner’s Manual

195

Compile Priority

Here you can make compile settings for the conﬁguration.

• [Resource]

Compiles arrangable components in order based on their component numbers. The Delay

values differ depending on the signal lines.

• [Fixed Delay]

Fixes the Delay value (number of Samples) for the signal lines. However, it also reduces the

number of components that can be arranged.

[Auto Delay Compensation]

This turns ON or OFF a function that automatically corrects the component delay when

[Fixed Delay] is selected.

Cascade

Tur ns the DME 64N cascade ON or OFF.

• Show Cascade Port on Conﬁguration Window

Checking this enables cascade.

• [Cascade Setting]

Here you can make settings that apply when cascade is enabled. Clicking here displays the

“Cascade Setting” dialog box.

→ See "Cascade Setting" dialog box on page 196.

[OK] Button

Accepts the changed settings and closes the dialog box.

[Cancel] Button

Closes the dialog box without changing the settings.

NOTE

These compile settings are reﬂected in online status. If you change the settings in ofﬂine status, it will be enabled when

going online after going ofﬂine once.

NOTE

Auto Delay Compensation will not function properly in conﬁgurations that have a loop connection.