User Manual

Chapter 4 Designer

DME Designer Owner’s Manual

214

■ Slot Component Properties

To display the “Slot Component Properties” dialog box, select a Slot component object, then click

the [Properties] command on the [Edit] menu.

[Label] Box

You can enter up to 100 characters to display over the object.

[Width] Box

Speciﬁes the width of the object in pixels.

[Height] Box

Speciﬁes the height of the object in pixels.

[Style]

Sets the style of the object. From the list, select [Plain], [Raised], or [Sunken].

[Label Font] button

Sets the font for the label. Clicking here displays the “Select Font” dialog box.

For information about the “Select Font” dialog box, see “'Select Font' Dialog Box” (page 236).

[Label Color] Button

This sets the color of the label text. Clicking here displays the “Select Color” dialog box.

[Inputs/Outputs Label Color] Button

Sets the color for the I/O port label text. Clicking here displays the “Select Color” dialog box.

[Color] Button

Sets the color of the object. Clicking here displays the “Select Color” dialog box.

[Edit I/O Port Label] Button

Speciﬁes the I/O port label. The “Edit Port Label” window opens when this button is clicked.

[OK] Button

Updates the settings and closes the dialog box.

[Cancel] Button

Closes the dialog box without changing the settings.

NOTE

For information about the “Select Color” dialog box, see “'Select Color' Dialog Box” (page 237).