User Manual

Chapter 4 Designer

DME Designer Owner’s Manual

218

[Label] Box

You can enter up to 100 English characters to display over the object.

[Width] Box

Speciﬁes the width of the object in pixels.

[Height] Box

Speciﬁes the height of the object in pixels.

[Style]

Sets the style of the object. From the list, select [Plain], [Raised], [Sunken], or [Image]. When

[Image] is selected the Open dialog will appear. Select an image ﬁle and click [Open] to place the

selected image as an object.

[Label Font] Button

Sets the font for the label. Clicking here displays the “Select Font” dialog box.

For information about the “Select Font” dialog box, see page 236.

[Label Color] Button

This sets the color of the label text. Clicking here displays the “Select Color” dialog box.

[Inputs/Outputs Labels Color] Button

Sets the color for the I/O port label text. Clicking here displays the “Select Color” dialog box.

[Color] Button

Sets the color of the object. Clicking here displays the “Select Color” dialog box.

Inputs/Outputs Sets

Sets the number of input/output ports. Enter a number into the [Inputs] box and [Outputs] box, or

set a value using the [▲] and [▼] buttons at the right of each box. The maximum of both input and

output ports is 64.

Edit I/O Port Label

Input and output port names up to 100 characters in length can be entered.

Double-Click Action

Sets the action that occurs when you double-click on a user module object arranged in the

Conﬁguration window.

• [Open User Module Design Window]

Opens the User Module window.

• [Open User Module Editor]

Opens the User Module editor.

NOTE

For information about the “Select Color” dialog box, see page 237.