User Manual

Chapter 5 Components
DME Designer Owner’s Manual
299
Double-click
Selects a number. You can change the selected number using the keyboard. There is no need to
enter units. When you press the <Enter> key, the numbers you entered will be set and the units
displayed.
Moving with the <Tab> Key
If you press <Tab> key while an edit box is selected, the selection will move to the next edit box.
If you press <Shift> + <Tab>, the selection moves to the previous edit box.
Changing Selections with the Key/Mouse Wheel
You can modify values in selected edit boxes using the direction keys or the mouse wheel.
• Up and Down Arrow Keys
Increases or decreases number settings.
•<PageUp> Key/<PageDown> Key
Increases or decreases number settings in large increments. The <PageUp> key increases
and the <PageDown> key decreases the setting.
• <Enter> Key
When you press the <Enter> key, the numbers you entered will be confirmed.
• <Ctrl> Key + <Enter> Key
When you press the <Ctrl> + <Enter> key, the setting will return to its default value.
• Mouse Wheel
Rolling the mouse wheel upward (away from you) increases the value. Rolling it down
(towards you) decreases the value.
•Dragging
Dragging upward increases the value, while dragging downward decreases it.
• <ESC> Key
The <ESC> key can be used to cancel a value being entered.
Enter a number from
the keyboard.
Set the value with
the <Enter> key.